HPE ProLiant ML350 G6 Parts
Unique Options
$198
$148.00
NOTE: The HPE PCI-X Expander kit converts a single PCI Express slot (slot 6) into two full height, full length 64-bit 100MHz PCI-X slots.
$499
$359.00
$879
$598.00
NOTE: See "Redundant Options" section below for Hot Plug Redundant Power supplies.
Memory
Registered RDIMMs
$93
$65.00
Unregistered with ECC UDIMMs
Optical Media
$143
$129.00
$166
$149.00
NOTE: Please note that some of the earlier BTO models may not support adding SATA Optical Drives. To ensure compatibility of the SATA Optical Drives, please add additional optical drives only on models with Quad-Core 5400 Series.
Drives
NOTE: This server model can be configured to use either 2.5 inch Small Form Factor (SFF) drives OR 3.5 inch Large Form Factor drives. Please be sure to verify which type your machine is configured to use before placing an order. If you are unsure about which type you need, please visit the section #1 – Does my machine use 2.5 inch SFF or 3.5 inch LFF drives? in our blog post here for help making this decision.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives 
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
NOTE: Please note that SFF 2.5" (small form factor) drives can only be installed on tower or rack models with SFF chassis (models).
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
SAS Hot Plug 3.5" Midline (MDL) Drives
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
$133
$95.00
$186
$128.00
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
$124
$72.60
$61
$42.97
$288
$220.00
SATA Hot Plug 2.5" SFF Entry (ETY) Drives
$270
$199.00
$97
$75.00
SATA Hot Plug 3.5" Midline (MDL) Drives
$231
$183.72
$140
$98.00
$161
$115.00
$141
$109.00
$298
$225.00
$77
$55.00
$184
$148.00
SATA Hot Plug 3.5" Entry (ETY) Drives
$216
$159.00
$110
$85.19
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
Networking
Gigabit Ethernet adapters
NOTE: Does not support Windows 2000.
NOTE: There is a maximum of five NC364T PCI Express Quad Port Gigabit Server Adapter NICs allowed in this server.
$165
$125.00
$161
$115.00
$72
$55.00
10 Gigabit Ethernet adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
$92
$75.00
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
Redundant Options
CAUTION: Optional Power Supplies used for Redundancy "must" match the original supplied power supply. Upgrades for more power headroom, when replacing the original power supplies must match if purchased for redundancy. Option Kits contain optional power supply, an IEC power cable and PDU IEC cables. In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
$184
$138.00
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
Drive Cage Options
NOTE: The Second drive cage installation replaces 2 internal optical bays. It is required to purchase a SAS RAID controller or SAS Expander Card to support over 8 HDD
$685
$539.00
NOTE: The Second drive cage installation replaces 2 internal optical bays.
$999
$850.00
Storage Controllers
SAS Controllers
HPE Smart Array P800 Controller
NOTE: Supports internal or external drive attach.
$219
$165.00
HPE Smart Array P212 Controller
HPE Smart Array P410 Controller
$201
$149.00
NOTE: When used with the embedded HPE Smart Array P410i controller, this battery module also requires a 24 inch SFP Battery Cable (496029-B21).
$173
$129.00
NOTE: HPE 256MB P-series Cache Upgrade (462968-B21) and HPE 650 mAh P-series battery (462969-B21) are valid options for the P410 controller.
HPE Smart Array P411 Controller
NOTE: While ordering the 256 BBWC (462968-B21) or the 512 BBWC (462967-B21) kits on the Smart Array controllers the customer also needs to order a 24 inch SFP Battery Cable (496029-B21)
SAS Controller Options
SAS HBA
SCSI HBA
NOTE: Supports external drive attach.
$207
$149.00
Processors
| NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Quad-Core Processors
Dual-Core Processors
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
