HPE ProLiant DL165 G5p Parts
Memory
NOTE: DIMM banks are active only when the corresponding processor socket is populated.
$194
$175.00
$80
$55.00
$54
$45.00
$95
$89.00
Optical Media
$277
$249.00
$195
$149.00
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
Serial-ATA (SATA) Non-Hot Plug Hard Drives (Non-Hot Plug Models Only)
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
$307
$219.00
$255
$198.00
$194
$145.00
$223
$180.00
$101
$80.00
$190
$140.00
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
$147
$113.00
Serial-ATA (SATA) Hot Plug Hard Drives (SATA/SAS Hot Plug Models Only)
SATA Hot Plug 3.5" Entry (ETY) Drives
$216
$159.00
$148
$115.00
SATA Hot Plug 3.5" Midline (MDL) Drives
$312
$248.00
$140
$98.00
$161
$115.00
$141
$109.00
$298
$225.00
$77
$55.00
$184
$148.00
Serial-ATA (SATA) Hot Plug 3.5" Hard Drives
$135
$98.00
$82
$68.00
$99
$73.00
$160
$115.00
$91
$67.00
Serial-ATA (SATA) Non-Hot Plug 3.5" Hard Drives
$231
$165.00
NOTE: The previous generation of 1.5G SATA drives are still supported.
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
SAS Hot Plug 3.5" Midline (MDL) Drives
NOTE: The purchase of SAS HBA or array controller is required.
Networking
Gigabit Ethernet Adapters
$68
$49.00
10 Gigabit Ethernet Adapters

NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
$92
$75.00
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
Storage Controllers
NOTE: The addition of storage controllers for internal hard drive use is intended for use ONLY with the Hot Plug SATA/SAS Model Chassis (495841-B21).
SAS Controllers
Smart Array E200 Controller
$204
$159.00
Smart Array P400 Controller

NOTE: Customers can only order one Smart Array P400/256MB Controller and one Battery-backed write cache upgrade (P/N 383280-B21) for the HPE ProLiant DL165 G5 server based on battery space.
$70
$53.00

NOTE: Customers can only order one Smart Array P400/512MB BBWC Controllers for the HPE ProLiant DL165 G5p server based on battery space.
$108
$81.00
Smart Array P800 Controller
Optional Upgrades

NOTE: Contains battery and memory module. For Smart Array P400 Controller.
$166
$129.00

NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the following servers if a Smart Array E500 is integrated outside of the factory. For all solutions, please refer to the HPE ProLiant QuickSpecs and User's Manual for detailed installation instruction.
$95
$75.00

NOTE: Contains battery and memory module. For Smart Array P400 Controller.
$166
$129.00
SAS HBA

NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
NOTE: PCI-Express SAS HBA.
$140
$95.00
SCSI HBA

NOTE: Recommended HBA for SCSI tape drive connect.
$207
$149.00
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc