HPE ProLiant DL165 G5 Parts

HPE ProLiant DL165 G5 Parts

HPE ProLiant DL165 G5 Parts

Drives

NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to the HBA or Controller technical specifications for details.

Serial-ATA (SATA) Non-Hot Plug Hard Drives (Non-Hot Plug Models Only)

SATA Non-Hot Plug 3.5" Entry (ETY) Drives

SATA Non-Hot Plug 3.5" Midline (MDL) Drives

Serial-ATA (SATA) Hot Plug Hard Drives (SATA/SAS Hot Plug Models Only)

SATA Hot Plug 3.5" Entry (ETY) Drives

SATA Hot Plug 3.5" Midline (MDL) Drives

Serial-ATA (SATA) Hot Plug 3.5" Hard Drives

Serial-ATA (SATA) Non-Hot Plug 3.5" Hard Drives

SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives

SAS Hot Plug 3.5" Midline (MDL) Drives

Networking

Gigabit Ethernet Adapters

10 Gigabit Ethernet Adapters

HPE NC522SFP Dual Port 10GbE Server Adapter<br><img src='/images/bestseller.gif' alt='best seller' width='91' height='12'> thumb
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
$92
$75.00
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.

Hot Plug HDD Backplane Option

Hot Plug HDD Backplane 1U 2S Kit thumb
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.

Storage Controllers

NOTE: The addition of storage controllers for internal hard drive use is intended for use ONLY with the Hot Plug SATA/SAS Model Chassis (445148-B21).

SAS Controllers

Smart Array E200 Controller

Smart Array E500 Controller

HPE Smart Array E500/256MB Controller thumb
NOTE: Standard RAID 0,1, 1+0.
NOTE: Customers can only order one Smart Array E500/256MB Controller and one Battery-backed write cache upgrade (P/N 383280-B21) for the HPE ProLiant DL165 G5 server based on battery space.
$392
$288.00

Smart Array P400 Controller

HPE Smart Array P400/256MB Controller thumb
NOTE: Customers can only order one Smart Array P400/256MB Controller and one Battery-backed write cache upgrade (P/N 383280-B21) for the HPE ProLiant DL165 G5 server based on battery space.
$70
$53.00
HPE Smart Array P400/512MB BBWC Controller thumb
NOTE: Customers can only order one Smart Array P400/512MB BBWC Controllers for the HPE ProLiant DL165 G5 server based on battery space.
$108
$81.00

Smart Array P800 Controller

Optional Upgrades

Battery-backed write cache upgrade thumb
NOTE: Contains battery only. For Smart Array P400 Controller.
NOTE: RAID 5 support. When installing a battery-backed write cache module, the HPE Smart Array E500 must be installed in the full-length PCI slot.
$157
$118.00
512MB Battery-backed write cache upgrade thumb
NOTE: Contains battery and memory module. For Smart Array P400 Controller.
$166
$129.00

Riser Board Kits

HPE PCI-X L/P Riser Kit thumb
NOTE: Replaces the standard Half Height (LP) PCI Express slot with a Half Height (LowProfile) PCI-X slot.
$139
$125.00

SAS HBA

HPE 8 Internal Port SAS HBA with RAID thumb
NOTE: For use with Hot Plug SAS/SATA models.
NOTE: The selection HPE 8 Internal Port SAS HBA with RAID requires the purchase of the LowProfile PCI-X Riser Option kit (P/N 452698-B21).
$75
$59.00
HPE SC44Ge Host Bus Adapter thumb
NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
NOTE: PCI-Express SAS HBA.
$140
$95.00

SCSI HBA

HPE SC11Xe Host Bus Adapter thumb
NOTE: Recommended HBA for SCSI tape drive connect.
$207
$149.00
Compare Selected