HPE ProLiant SL390s G7 Hard Drives

HPE ProLiant SL390s G7 Hard Drives

HPE ProLiant SL390s G7 Hard Drives

Drives

NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: The non-hot plug hard drives use a quick release carrier.
NOTE: Hot plug hard drives are for 2U tray only.
NOTE: non hot plug with quick release carrier are used in 1U tray and internal to the 2U tray.

SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives

12G 15K Drives

12G 10K Drives

6G 15K Drives

6G 10K Drives

3G 15K Drives

3G 10K Drives

SAS Hot Plug 2.5" SFF Midline (MDL) Drives

SATA Hot Plug 2.5" SFF Midline (MDL) Drives

SATA Hot Plug 2.5" SFF Entry (ETY) Drives

SATA Hot Plug 2.5" Midline (MDL) Solid State Drives

RECOMMENDATION: For best performance of SSD drives it is recommended that any Smart Array Controller use a max of 4 drives. For this product a second Smart Array option can be used for the second set of 4 SSD drives.

SAS Non-Hot Plug Enterprise (ENT) Drives - with quick-release (QR) carrier

SATA Non-Hot Plug Entry (ETY) Drives - with quick-release (QR) carrier

SATA Non-Hot Plug Midline (MDL) Drives - with quick-release (QR) carrier

SATA Non-Hot Plug Midline (MDL) Solid State Drives - with quick-release (QR) carrier

NOTE: The non-hot plug hard drives use a quick release carrier.
NOTE: One 2 Drive SFF Drive Cage (582657-B21) is required when installing 2 SFFF drives.
NOTE: When Adding SAS one of the following cable kits needs to be ordered depending on which SAS controller installing - HPE P212 SAS 4HDD Cable Kit 574001-B21 or HPE P410 SAS 4HDD Cable Kit 583997-B21.
NOTE: Hot plug hard drives are for 2U tray only.
NOTE: non hot plug with quick release carrier are used in 1U tray and internal to the 2U tray.
Compare Selected