HP ProLiant SL2x170z G6 Parts

Unique Options
HP z6000 P410 SAS 4 Hard Drive Power Cable Kit
NOTE: This is required when adding SAS hard drives using the P410 controller.
$108.00
HP SL160/170 G6 Power Cable Kit
NOTE: This is needed when adding more than two 2.5" hard drives.
HP z6000 Battery Back Write Cache Hardware Kit 
NOTE: This is required when adding BBWC.
Out of stock
HP z6000 Small Form Factor 2 Drive Cage Kit
NOTE: This is required when adding SFF (2.5") SSD or hard drives.
$155.00
Back to top
Processors
Six-Core Processors
Quad-Core Processors
Dual-Core Processors
HP SL2x170z G6 Intel® Xeon® E5502 (1.86GHz/2-core/4MB/80W) Processor Kit
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 and 5600 Series, the letter preceding the model number indicates the performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.
Back to top
Memory
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.
$81.00 $65.00
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.
$63.00 $49.00
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: Maximum 12 DIMMs supported per node.
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600 (DDR3-1333) Unbuffered CAS-9 Low Power Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:www.hp.com/go/ddr3memory-configurator.
$237.00 $175.00
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient. NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel).
NOTE: PC3L is a low voltage memory.
Back to top
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: The hard drives use a quick release carrier.
NOTE: One 2 Drive SFF Drive Cage (582657-B21) is required when installing 2 SFF drives.
NOTE: When adding SAS one of the following cable kits needs to be ordered depending on which SAS controller installing - HP P212 SAS 4HDD Cable Kit 574001-B21.
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives - with quick-release (QR) carrier
SAS Non-Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives - with quick-release (QR) carrier
SAS Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug SFF (2.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
Back to top
Networking
Gigabit Ethernet Adapters
10 Gigabit Ethernet Adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:www.hp.com/go/ProLiantNICs.
$97.00 $68.00
Back to top
InfiniBand
QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA
NOTE: Please see the QuickSpecs for additional information:http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04155383
$338.00 $275.00
Back to top
I/O Expansion Options
Back to top
Power Supplies
NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor
CAUTION: In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
HP 1200W Common Slot Platinum Hot Plug Power Supply Kit
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
$111.00 $79.00
Back to top
Rack Options
HP SL Universal Switch Rail Kit
NOTE: This kit allows you to install HP or 3rd party switch in the same rack as SL6000.
$98.00 $78.00
Back to top
Storage Controllers
SAS Controllers
Smart Array P212 Controller
NOTE: HP P212 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P212 controller (574001-B21)
Smart Array P410 Controller
NOTE: HP P410 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P410 controller (583997-B21)
Smart Array P411 Controller
Optional Upgrades
NOTE: HP z6000 BBWC HDWR KIT is required when adding BBWC (582653-B21)
HP 256MB P-series Cache Upgrade
NOTE: Supported on HP Smart Array P212 Controller only.
$50.00 $35.00
HP 512MB P-Series Battery Backed Write Cache Upgrade
NOTE: Supported on HP Smart Array P410 Controller and HP Smart Array P411 Controller only.
$188.00 $149.00
HP 650 mAh P-Series Battery
NOTE: To enable BBWC on the 256MB cache.
$201.00 $138.00
NOTE: Supported on HP Smart Array P212 Controller.
HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and Updates Single Server License
NOTE: This part number can be used to purchase a single license or to order multiple licenses with a single activation key. Customers will receive a license entitlement certificate via e-mail. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Include one year of 24x7 HP Software Technical Support Services.
$806.00 $650.00
SCSI HBA
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter
NOTE: Recommended HBA for SCSI tape drive connect.
$196.00 $159.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111643
(SCSI HBA)
Back to top
Storage Options
Storage Fibre Channel HBA
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see:http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
Emulex Fibre Channel HBAs
QLogic Fibre Channel HBAs
Storage SCSI HBA
HP U320e SCSI Dual Channel Host Bus Adapter
NOTE: Recommended HBA for MSL SCSI Tape Library connect.
$330.00 $248.00
Converged Network Adapter
Back to top
Disk Storage Systems
Disk Enclosures
$2,219.00 $1,850.00
HP D2700 Disk Enclosure
NOTE: Please see the QuickSpecs for additional options and configuration information at:
$821.00 $599.00
Back to top

Last updated: 11/29/2020

Need help finding the correct part? Live Chat operators are standing by. LET US HELP