HP ProLiant SL170s G6 Parts

Processors
Six-Core Processors
Quad-Core Processors
Dual-Core Processors
HP SL170z G6 Intel® Xeon® E5507 (2.26GHz/4-core/4MB/80W) Processor Kit
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number indicates the performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.
Back to top
Memory
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.
$81.00 $65.00
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.
$63.00 $49.00
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: Maximum 12 DIMMs supported per node.
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600 (DDR3-1333) Unbuffered CAS-9 Low Power Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:www.hp.com/go/ddr3memory-configurator.
$237.00 $175.00
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient. NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel).
NOTE: PC3L is a low voltage memory.
Back to top
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: The hard drives use a quick release carrier.
NOTE: One SL170s SFF Enablement Kit (622274-B21) ( is required when installing 2 SFF drives in the LFF space
NOTE: When adding SAS one of the following cable kits needs to be ordered depending on which SAS controller installing - HP P212 SAS 4HDD Cable Kit 574001-B21 or HP P410 SAS 4HDD Cable Kit 583997-B21.
SAS Quick Release SFF (2.5-inch) Enterprise (ENT) Drives
SAS Quick Release LFF (3.5-inch) Enterprise (ENT) Drives
SAS Quick Release LFF (3.5-inch) Midline (MDL) Drives
SATA Quick Release SFF (2.5-inch) Midline (MDL) Drives
SATA Quick Release LFF (3.5-inch) Midline (MDL) Drives
3G SATA MLC Quick Release SFF (2.5-inch) Enterprise Mainstream Solid State Drives
Back to top
Networking
Gigabit Ethernet Adapters
10 Gigabit Ethernet Adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:www.hp.com/go/ProLiantNICs.
$97.00 $68.00
Back to top
InfiniBand
QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA
NOTE: Please see the QuickSpecs for additional information:http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04155383
$338.00 $275.00
Back to top
I/O Expansion Options
Back to top
Storage Options
Storage Fibre Channel HBA
NOTE: For the complete listing of Fibre Channel Host Bus Adapters for Windows 2000, Windows Server 2003 and Linux, please see:http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
Converged Network Adapter
Back to top
Storage Controllers
SAS Controllers
Smart Array P212 Controller
NOTE: HP P212 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P212 controller (574001-B21)
Smart Array P410 Controller
NOTE: HP P410 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P410 controller (583997-B21)
Smart Array P411 Controller
Optional Upgrades
NOTE: HP z6000 BBWC HDWR KIT is required when adding BBWC (582653-B21)
HP 256MB P-series Cache Upgrade
NOTE: Supported on HP Smart Array P212 Controller only.
$50.00 $35.00
HP 512MB P-Series Battery Backed Write Cache Upgrade
NOTE: Supported on HP Smart Array P410 Controller and HP Smart Array P411 Controller only.
$188.00 $149.00
HP 650 mAh P-Series Battery
NOTE: To enable BBWC on the 256MB cache.
$201.00 $138.00
NOTE: Supported on HP Smart Array P212 Controller.
HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and Updates Single Server License
NOTE: This part number can be used to purchase a single license or to order multiple licenses with a single activation key. Customers will receive a license entitlement certificate via e-mail. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Include one year of 24x7 HP Software Technical Support Services.
$806.00 $650.00
HP Smart Array Hot Plug Advance Pack for B110i w/1y 24x7 Supp Physical 1 Svr LTU
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
(Smart Array P212 Controller)
(Smart Array P410 Controller)
(Smart Array P411 Controller)
(Smart Array Hot Plug Advance Pack for B110i)
SCSI HBA
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter
NOTE: Recommended HBA for SCSI tape drive connect.
$196.00 $159.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111643
(SCSI HBA)
Back to top
Tape Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media see:http://www.hp.com/go/tape. For hardware and software compatibility of HP tape backup products see: https://h20272.www2.hp.com/spock/.
Back to top
Rack Options
HP TFT7600 G2 KVM Console Rackmount Keyboard Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
HP USB BFR with PVC Free US Keyboard/Mouse Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
$144.00 $98.00
HP Server Console Switches
HP TAA 0x2x16xKVM Server Console G2 Switch
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
HP Server Console Switch G2 with Virtual Media & CAC
HP KVM CAT5 1-pack USB Interface Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
HP IP Console Switch G2 with Virtual Media & CAC
Back to top

Last updated: 11/14/2020

Need help finding the correct part? Live Chat operators are standing by. LET US HELP