HPE ProLiant SL170s G6 Parts
Memory
Registered DIMMs (RDIMMs)
CA$67
CA$52.22
CA$74
CA$52.22
CA$69
CA$53.59

NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.
CA$111
CA$89.32
CA$77
CA$53.59

NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.
CA$77
CA$53.59
CA$92
CA$65.96
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: Maximum 12 DIMMs supported per node.
$57
$38.00
CA$91
CA$61.83
CA$92
CA$65.96
$237
$175.00
NOTE: PC3L is a low voltage memory.
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: The hard drives use a quick release carrier.
NOTE: One SL170s SFF Enablement Kit (622274-B21) ( is required when installing 2 SFF drives in the LFF space
NOTE: When adding SAS one of the following cable kits needs to be ordered depending on which SAS controller installing - HPE P212 SAS 4HDD Cable Kit 574001-B21 or HPE P410 SAS 4HDD Cable Kit 583997-B21.
SAS Quick Release SFF (2.5-inch) Enterprise (ENT) Drives
SAS Quick Release LFF (3.5-inch) Enterprise (ENT) Drives
SAS Quick Release LFF (3.5-inch) Midline (MDL) Drives
SATA Quick Release SFF (2.5-inch) Midline (MDL) Drives
SATA Quick Release LFF (3.5-inch) Midline (MDL) Drives
CA$146
CA$115.42
CA$139
CA$109.93
3G SATA MLC Quick Release SFF (2.5-inch) Enterprise Mainstream Solid State Drives
CA$1,002
CA$588.11
CA$853
CA$601.86
Networking
Gigabit Ethernet Adapters
CA$111
CA$81.07
CA$227
CA$171.76
CA$144
CA$104.43
CA$221
CA$158.02
CA$99
CA$75.58
$111
$79.00
10 Gigabit Ethernet Adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately
CA$126
CA$103.06
CA$143
CA$100.31
InfiniBand
CA$126
CA$87.94
CA$464
CA$377.88
I/O Expansion Options
$221
$188.00
Storage Options
Storage Fibre Channel HBA
Brocade Fibre Channel HBAs
CA$320
CA$188.25
Emulex Fibre Channel HBAs
CA$96
CA$67.33
CA$199
CA$149.78
QLogic Fibre Channel HBAs
CA$69
CA$52.22
CA$118
CA$82.45
Storage Controllers
SAS Controllers
Smart Array P212 Controller
NOTE: HPE P212 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P212 controller (574001-B21)
Smart Array P410 Controller
NOTE: HPE P410 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P410 controller (583997-B21)
CA$166
CA$97.56
Smart Array P411 Controller
$270
$203.00
CA$687
CA$460.32
CA$717
CA$548.27
Optional Upgrades
NOTE: HPE z6000 BBWC HDWR KIT is required when adding BBWC (582653-B21)

NOTE: Supported on HPE Smart Array P212 Controller only.
CA$56
CA$39.85

NOTE: Supported on HPE Smart Array P410 Controller and HPE Smart Array P411 Controller only.
CA$238
CA$177.26

NOTE: To enable BBWC on the 256MB cache.
CA$366
CA$214.36
NOTE: Supported on HPE Smart Array P212 Controller.
CA$73
CA$53.59

HPE Smart Array Advanced Pack including 1yr 24x7 Technical Support and Updates Single Server License
NOTE: This part number can be used to purchase a single license or to order multiple licenses with a single activation key. Customers will receive a license entitlement certificate via e-mail. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Include one year of 24x7 HPE Software Technical Support Services.
$806
$650.00
SCSI HBA

NOTE: Recommended HBA for SCSI tape drive connect.
CA$349
CA$204.74
(SCSI HBA)
Tape Backup
CA$8,445
CA$4,955.00
CA$5,648
CA$3,356.93
CA$6,703
CA$3,984.89
$1,428
$985.00
CA$3,371
CA$2,003.44
Rack Options
HPE TFT7600 G2 KVM Console Rackmount Keyboard Monitor
HPE Server Console Switches
HPE Server Console Switch G2 with Virtual Media & CAC
HPE IP Console Switch G2 with Virtual Media & CAC
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Six-Core Processors
Quad-Core Processors
Dual-Core Processors

NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number indicates the performance/wattage of the processor. X denotes High Performance/Wattage; E denotes Enterprise Performance/Wattage (Mainstream); and L denotes Lower Wattage.