Sign In or Register
Sales & Support: 1-877-418-3246
0 ITEMS | $0.00 View Cart
 

HP ProLiant ML370 G6 Parts

Memory
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon processor 5600 series processors.
$97.00 $72.00
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon processor 5600 series processors.
$155.00 $120.00
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient
Back to top
Drives
NOTE: This server model can be configured to use either 2.5 inch Small Form Factor (SFF) drives OR 3.5 inch Large Form Factor drives. Please be sure to verify which type your machine is configured to use before placing an order. If you are unsure about which type you need, please visit the section #1 – Does my machine use 2.5 inch SFF or 3.5 inch LFF drives? in our blog post here for help making this decision.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
SAS Hot Plug 3.5" Midline (MDL) Drives
HP 750GB 3G SAS 7.2K rpm LFF 3.5" Dual Port Midline Hard Drive
461135-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
SATA Hot Plug 3.5" Midline (MDL) Drives
SATA Hot Plug 3.5" Entry (ETY) Drives
SATA Hot Plug 2.5" SFF Entry (ETY) Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SATA Hot Plug Midline (MDL) Solid State Drives
SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Back to top
Networking
Gigabit Ethernet adapters
HP NC364T PCI Express Quad Port Gigabit Server Adapter
NOTE: There is a maximum of five NC364T PCI Express Quad Port Gigabit Server Adapters allowed in this server.
$160.00 $124.00
10 Gigabit Ethernet adapters
HP NC522SFP Dual Port 10GbE Gigabit Server Adapter
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
$459.00 $399.00
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
HP NC524SFP Dual Port 10GbE Server Adapter
NOTE: One NC524SFP allowed per system; a minimum of two gigabytes (2 GB) of server memory is required for the NC524SFP module.
$554.00 $499.00
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs.
Smart-mini DIMM Module
HP ML370 G6 and DL370 G6 Smart-mini DIMM Module
NOTE: By plugging the Smart-mini DIMM Module to the HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter, TCP/IP Offload Engine (TOE) for Windows is enabled/supported.
Back to top
Power Supplies
CAUTION: Many HP ProLiant Servers now offer new power options, including Common Slot Power Supplies. These power supplies come in multiple power ratings and higher efficiency levels to offer the Right Size solution to fit your configuration. This provides improved power delivery and the advantage of reclaiming lost power. Prior to making a power supply selection it is "highly recommended" that the "HP Power Advisor" is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at www.hp.com/go/proliant-energy-efficient" or www.hp.com/go/hppoweradvisor. In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
Power Options
Back to top
Storage Controllers
SAS Controllers
HP Smart Array P800 Controller
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
Optional Upgrades
256 MB Cache Module
NOTE: Supported on HP Smart Array P212 Controller only.
$67.00 $48.00
512MB BBWC
NOTE: When used with the embedded HP Smart Array P410i controller, this battery module also requires a 24 inch SFP Battery Cable (496029-B21).
$119.00 $92.00
Battery Kit upgrade
NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HP P410i Smart Array (integrated), HP Smart Array P212 Controller, HP Smart Array P410 Controller, and HP Smart Array P411 Controller only.
$104.00 $81.00
HP Smart Array Advanced Pack No Media 1-Server license including 1yr 24x7 Technical Support
NOTE: This part number can be used to purchase a single license or to order multiple licenses with a single activation key. Customers will receive a license entitlement certificate via e-mail. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Include one year of 24x7 HP Software Technical Support Services.
$472.00 $425.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SAS Controller Options
HP SAS Expander Card
NOTE: For use with the additional 8 SFF drive cage (507803-B21).
$373.00 $289.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SAS HBA
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Back to top

Last updated: 8/24/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP