HPE ProLiant ML370 G6 Parts
Memory
Registered DIMMs (RDIMMs)
$49
$38.00
$54
$38.00
$50
$39.00

NOTE: Low Voltage DIMMs can only be used with Intel Xeon processor 5600 series processors.
$81
$65.00
$56
$39.00

NOTE: Low Voltage DIMMs can only be used with Intel Xeon processor 5600 series processors.
$56
$39.00
$67
$48.00
$67
$48.00
Unbuffered with ECC DIMMs (UDIMMs)
$57
$38.00
$66
$45.00
$67
$48.00
Optical Media
$143
$129.00
$166
$149.00
$100
$75.00
$54
$39.00
Drives

NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
$133
$95.00
$186
$128.00
SAS Hot Plug 3.5" Midline (MDL) Drives
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
$144
$98.00
$83
$58.00
$288
$220.00
SATA Hot Plug 3.5" Midline (MDL) Drives
$312
$248.00
$140
$98.00
$161
$115.00
$141
$109.00
$298
$225.00
$77
$55.00
$184
$148.00
SATA Hot Plug 3.5" Entry (ETY) Drives
$216
$159.00
$148
$115.00
SATA Hot Plug 2.5" SFF Entry (ETY) Drives
$270
$199.00
$97
$75.00
SATA Hot Plug Midline (MDL) Solid State Drives
$186
$135.00
$380
$299.00
SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
$166
$134.00
$1,745
$1,229.00
Networking
Gigabit Ethernet adapters
$81
$59.00

NOTE: There is a maximum of five NC364T PCI Express Quad Port Gigabit Server Adapters allowed in this server.
$165
$125.00
$161
$115.00
$72
$55.00
10 Gigabit Ethernet adapters

NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
$92
$75.00

NOTE: One NC524SFP allowed per system; a minimum of two gigabytes (2 GB) of server memory is required for the NC524SFP module.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
$99
$69.00
Smart-mini DIMM Module

NOTE: By plugging the Smart-mini DIMM Module to the HPE NC375i Integrated Quad Port Multifunction Gigabit Server Adapter, TCP/IP Offload Engine (TOE) for Windows is enabled/supported.
$335
$265.00
Power Supplies
CAUTION: Many HPE ProLiant Servers now offer new power options, including Common Slot Power Supplies. These power supplies come in multiple power ratings and higher efficiency levels to offer the Right Size solution to fit your configuration. This provides improved power delivery and the advantage of reclaiming lost power. Prior to making a power supply selection it is "highly recommended" that the "HPE Power Advisor" is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at https://paonline56.itcs.hpe.com/. In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
$75
$54.00
$83
$59.00
$184
$138.00
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
Power Options
$155
$125.00
Drive Cage Options
Storage Controllers
SAS Controllers
HPE Smart Array P800 Controller
HPE Smart Array P212 Controller
HPE Smart Array P410 Controller
HPE Smart Array P411 Controller
Optional Upgrades

NOTE: Supported on HPE Smart Array P212 Controller only.
$41
$29.00

NOTE: When used with the embedded HPE Smart Array P410i controller, this battery module also requires a 24 inch SFP Battery Cable (496029-B21).
$173
$129.00

NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HPE P410i Smart Array (integrated), HPE Smart Array P212 Controller, HPE Smart Array P410 Controller, and HPE Smart Array P411 Controller only.
$207
$156.00

NOTE: This part number can be used to purchase a single license or to order multiple licenses with a single activation key. Customers will receive a license entitlement certificate via e-mail. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Include one year of 24x7 HPE Software Technical Support Services.
$806
$650.00
SAS Controller Options

NOTE: For use with the additional 8 SFF drive cage (507803-B21).
$233
$175.00
SAS HBA
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Quad-Core Processors
$310
$246.00
$341
$271.00
$191
$154.00
$268
$216.00
$262
$208.00
$278
$221.00
$310
$246.00