Sign In or Register
Sales & Support: 1-877-418-3246
0 ITEMS | $0.00 View Cart
 

HP ProLiant ML350 G6 Parts

Unique Options
HP ML350 G6 2 Slot PCI-X Riser Kit
NOTE: The HP PCI-X Expander kit converts a single PCI Express slot (slot 6) into two full height, full length 64-bit 100MHz PCI-X slots.
$799.00
NOTE: See "Redundant Options" section below for Hot Plug Redundant Power supplies.
Back to top
Memory
Registered RDIMMs
Unregistered with ECC UDIMMs
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient.
Back to top
Optical Drives
NOTE: Please note that some of the earlier BTO models may not support adding SATA Optical Drives. To ensure compatibility of the SATA Optical Drives, please add additional optical drives only on models with Quad-Core 5400 Series.
Back to top
Drives
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
6G 15K Drives
6G 10K Drives
3G 15K Drives
3G 10K Drives
HP 36GB 3G SAS 10K 2.5" SFF Single Port Hard Drive
375859-B21
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
NOTE: Please note that SFF 2.5" (small form factor) drives can only be installed on tower or rack models with SFF chassis (models).
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
SAS Hot Plug 3.5" Midline (MDL) Drives
HP 750GB 3G SAS 7.2K rpm LFF 3.5" Dual Port Midline Hard Drive
461135-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
SATA Hot Plug 2.5" SFF Entry (ETY) Drives
SATA Hot Plug 3.5" Midline (MDL) Drives
SATA Hot Plug 3.5" Entry (ETY) Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
Back to top
Networking
Gigabit Ethernet adapters
HP NC364T PCI-E Quad Port Gigabit Server Adapter
NOTE: Does not support Windows 2000.
NOTE: There is a maximum of five NC364T PCI Express Quad Port Gigabit Server Adapter NICs allowed in this server.
$160.00 $124.00
10 Gigabit Ethernet adapters
HP NC522SFP Dual Port 10GbE Server Adapter
NOTE: A minimum of two gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
$459.00 $399.00
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs
Back to top
Redundant Options
CAUTION: Optional Power Supplies used for Redundancy "must" match the original supplied power supply. Upgrades for more power headroom, when replacing the original power supplies must match if purchased for redundancy. Option Kits contain optional power supply, an IEC power cable and PDU IEC cables. In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
NOTE: Prior to making a power supply selection it is "highly recommended" that the "HP Power Advisor" is run to determine the right size power supply for your server configuration. www.hp.com/go/proliant-energy-efficient
Back to top
Drive Cage Options
HP ML350/370 G6 8 Small Form Factor (SFF) 2nd Drive Cage Kit
NOTE: The Second drive cage installation replaces 2 internal optical bays. It is required to purchase a SAS RAID controller or SAS Expander Card to support over 8 HDD
$1,083.00 $975.00
HP ML350/ML/DL370G6 2 Large Form Factor Drive Kit
NOTE: The Second drive cage installation replaces 2 internal optical bays.
$331.00 $298.00
Back to top
Storage Controllers
SAS Controllers
HP Smart Array P800 Controller
HP Smart Array P800 Controller
NOTE: Supports internal or external drive attach.
$119.00 $92.00
NOTE: Please see the following QuickSpecs additional information:
HP Smart Array P212 Controller
NOTE: Please see the following QuickSpecs additional information:
HP Smart Array P410 Controller
HP 512MB P-series Battery Backed Write Cache Upgrade
NOTE: When used with the embedded HP Smart Array P410i controller, this battery module also requires a 24 inch SFP Battery Cable (496029-B21).
$119.00 $92.00
NOTE: HP 256MB P-series Cache Upgrade (462968-B21) and HP 650 mAh P-series battery (462969-B21) are valid options for the P410 controller.
NOTE: Please see the following QuickSpecs additional information:
HP Smart Array P411 Controller
NOTE: While ordering the 256 BBWC (462968-B21) or the 512 BBWC (462967-B21) kits on the Smart Array controllers the customer also needs to order a 24 inch SFP Battery Cable (496029-B21)
NOTE: Please see the following QuickSpecs additional information:
SAS Controller Options
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SAS HBA
NOTE: Please see the HBA QuickSpecs for additional information:
SCSI HBA
HP Single Channel Ultra320 PCI-E SC11Xe Host Bus Adapter
NOTE: Supports external drive attach.
$299.00 $219.00
NOTE: Please see the following QuickSpecs for additional information:
Back to top

Last updated: 7/23/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP