HP ProLiant ML110 Gen10 Parts

Unique Options
HPE ML110 Gen10 4LFF Drive Backplane Cage Kit
NOTE: The 4 LFF hot-plug drive cage can be installed in both box 1 and box 2. Follow the same installation procedure
HPE ML110 Gen10 4LFF Non Hot Plug Drive Cage Kit
NOTE: The 4 LFF Non hot-plug drive cage can be installed in both box 1 and box 2. Follow the same installation procedure
HPE ML110 Gen10 8SFF Drive Backplane Cage Kit
NOTE: The 8SFF hot-plug drive cage can be installed in both box 1 and box 2. Follow the same installation procedure
HPE ML110 Gen10 Redundant Power Supply Enablement Kit
NOTE: This kit is also required to support an optional redundant fan kit.
HPE ML110 Gen10 Redundant Fan with 4 Fans Kit
NOTE: When one of the following scenarios occurs, the server requires a Redundant Fan with a 800W Redundant Power Supply to be installed.
1. When a second HDD cage is installed and the SAS HDDs are running at 15K RPM
2. When a SAS SSD is installed.
3. If one fan fails, the system will be required to continue operating with a Redundant Fan. This condition is indicated by a flashing amber Health LED
4. When the system requirements are to meet the A3 extended operating environment.
HPE ML110 Gen10 550W ATX Power Supply Kit
NOTE: Prior to selecting a power supply option, it is highly recommended that you review your server configuration in the HPE Power Advisor tool to determine the right size power supply for your server configuration. The HPE Power Advisor is located at: http://www.hpe.com/info/hppoweradvisor
Back to top
Drives
Enterprise - 12G SAS - SFF Drives
Enterprise - 12G SAS - LFF Drives
Midline - 12G SAS - SFF Drives
Midline - 12G SAS - LFF Drives
Midline - 6G SATA - SFF Drives
Midline - 6G SATA - LFF Drives
Write Intensive
Read Intensive - 6G SATA - SFF - Solid State Drives
Read Intensive - 6G SATA - LFF - Solid State Drives
Read Intensive - 6G SAS - SFF - Solid State Drives
Mixed Use - 12G SAS - SFF - Solid State Drives
Mixed Use - 6G SATA - SFF - Solid State Drives
M.2 Selection
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only.
NOTE: Installation of the M.2 universal enablment card kit is limited to PCIe slot 1, 2, 3 or 4. Max. in ML350
Gen10 is one M.2 enablment card kit.
NOTE: M.2 supports Software RAID only
Mixed Use - SATA
HPE 480GB SATA 6G Mixed Use M.2 2280 Digitally Signed Firmware SSD
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only.
NOTE: M.2 supports Software RAID only
$2,500.00
Read Intensive - 6G SATA - M.2 - Solid State Drives
HPE 150GB SATA 6G Read Intensive M.2 2280 Digitally Signed Firmware SSD
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only.
NOTE: M.2 supports Software RAID only
$549.00
Hard Drive Blank Kits
Back to top
Networking
1 Gigabit Ethernet adapters
10 Gigabit Ethernet adapters
HPE Ethernet 10Gb 2-port 562T Adapter
NOTE: The ML110 Gen10 ships with 2x 1 Gb Embedded.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information:
Back to top
Power Supplies
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet connector
Back to top
Cooling Options
HPE ML110 Gen10 Redundant Fan with 4 Fans Kit
NOTE: When one of the following scenarios occurs, the server requires a Redundant Fan with a 800W Redundant Power Supply to be installed
1. When a second HDD cage is installed and the SAS HDDs are running at 15K RPM.
2. When a SAS SSD is installed.
3. If one fan fails, the system will be required to continue operating with a Redundant Fan. This condition is indicated by a flashing amber Health LED
4. When the system requirements are to meet the A3 extended operating environment.
Back to top
Storage Controllers
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet.
Performance RAID Controllers
NOTE: All performance RAID controllers are supported by the HPE Smart Storage Battery (875241-B21), which supports multiple devices and is sold separately.
Essential RAID Controllers
Optional Upgrades
HPE 96W Smart Storage Battery (up to 20 Devices/260mm Cable) Kit
NOTE: Provides backup power for multiple HPE Smart Array controllers or other devices. Is required with performance RAID controllers
Back to top
Rack Options
Rail Kits
HPE ML Gen10 Tower to Rack Conversion Kit with Sliding Rail Rack Shelf and Cable Management Arm
NOTE: Easy install rack rail tray which takes up 1U height in a standard rack facility. This kit is supported in both ML350 and ML110 Gen10 for tower to rack conversion.
Back to top

Last updated: 12/10/2018

Need help finding the correct part? Live Chat operators are standing by. LET US HELP