HPE ProLiant ML110 Gen10 Parts
Keep your HPE ProLiant ML110 Gen10 server running smoothly with our selection of enterprise-grade replacement and upgrade parts. Ideal for small to medium-sized businesses, this single-socket tower server balances performance and affordability.
Available ML110 Gen10 Parts:
- Memory: DDR4 ECC RDIMM and LRDIMM
- Drives: SAS, SATA, and optional NVMe SSDs
- Storage Controllers: Smart Array RAID and HBA options
- Networking: PCIe Ethernet adapters
- Power Supplies: Hot-plug redundant PSU options
- Processors: Intel Xeon Bronze, Silver, and Gold CPUs
✅ Looking for a specific ML110 Gen10 part? Browse the subcategories below or contact us for expert help.
Unique Options
NOTE: The 4 LFF hot-plug drive cage can be installed in both box 1 and box 2. Follow the same installation procedure
$985
$718.00
NOTE: The 4 LFF Non hot-plug drive cage can be installed in both box 1 and box 2. Follow the same installation procedure
$790
$628.00
NOTE: The 8SFF hot-plug drive cage can be installed in both box 1 and box 2. Follow the same installation procedure
$985
$759.00
NOTE: This kit is also required to support an optional redundant fan kit.
$679
$485.00
NOTE: When one of the following scenarios occurs, the server requires a Redundant Fan with a 800W Redundant Power Supply to be installed.
1. When a second HDD cage is installed and the SAS HDDs are running at 15K RPM
2. When a SAS SSD is installed.
3. If one fan fails, the system will be required to continue operating with a Redundant Fan. This condition is indicated by a flashing amber Health LED
4. When the system requirements are to meet the A3 extended operating environment.
NOTE: Prior to selecting a power supply option, it is highly recommended that you review your server configuration in the HPE Power Advisor tool to determine the right size power supply for your server configuration. The HPE Power Advisor is located at: (link)
$441
$315.00
Memory
For new Gen10 memory population rule whitepaper and optimal memory performance guidelines, please go to:
For Gen10 memory speed table, please go to: (link)
For memory Reliability, Accessibility, Serviceability (RAS) features whitepaper like Gen10 Fast Fault Tolerance and legacy mirrored memory feature etc. please go to: (link)
Notes:
- Maximum memory capacity and speed per processor is dependent on processor model selection or limitation.
- DDR4-2933 Memory Kits are only supported with 2nd Generation Intel Xeon Scalable Series Processors and DDR4-2666 Memory Kits are only supported with 1st Generation Intel Xeon Scalable Series Processors.
HPE DDR4 Memory
Registered DIMMs (RDIMMs) for 2nd Generation Intel Xeon Scalable Series
$140
$100.00
$137
$98.00
$179
$128.00
Registered DIMMs (RDIMMs) for 1st Generation Intel Xeon Scalable Series
$105
$75.00
$111
$79.00
Optical Media
Drives
Hard Disk Drives - 2.5in SFF SAS
Enterprise - 12G SAS - SFF HDD
$522
$348.00
$266
$178.00
$235
$168.00
$475
$358.00
$325
$249.00
$161
$115.00
$196
$147.00
Midline - 12G SAS - SFF HDD
Hard Disk Drives - 2.5in SFF SATA
Midline - 6G SATA - SFF HDD
Hard Disk Drives - 3.5in LFF SAS
Enterprise - 12G SAS - LFF HDD
Midline - 12G SAS - LFF HDD
$1,379
$985.00
$809
$595.00
$699
$468.00
$469
$353.00
$274
$196.00
Hard Disk Drives - 3.5in LFF SATA
Midline - 6G SATA - LFF HDD
$1,215
$888.00
$923
$675.00
$790
$558.00
$681
$476.00
$485
$348.00
Solid State Drives - 2.5in SFF SAS
For SSD selection guidance, please visit https://ssd.hpe.com/
Read Intensive - 12G SAS - SFF - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$2,981
$2,129.00
$2,867
$2,108.00
$2,325
$1,661.00
$1,721
$1,229.00
$2,913
$2,158.00
$1,733
$1,238.00
$1,733
$1,238.00
$1,778
$1,252.00
$1,040
$743.00
Read Intensive - 12G SAS - SFF - SC Value SAS DS SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$4,570
$3,264.00
$1,659
$1,202.00
Write Intensive - 12G SAS - SFF - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$987
$700.00
$1,050
$775.00
$1,050
$745.00
Mixed Use - 12G SAS - SFF - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$3,614
$2,442.00
$2,388
$1,725.00
$2,360
$1,662.00
$1,845
$1,387.00
$1,799
$1,285.00
$1,368
$977.00
$998
$829.00
$839
$599.00
$839
$599.00
$833
$626.00
$498
$356.00
$536
$383.00
$662
$473.00
Mixed Use - 12G SAS - SFF - SC Value SAS DS SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$2,180
$1,775.00
$1,136
$806.00
$2,376
$1,697.00
Solid State Drives - 2.5in SFF SATA
Read Intensive - 6G SATA - SFF - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$1,872
$1,337.00
$1,872
$1,337.00
$1,582
$1,130.00
$1,544
$1,103.00
$1,582
$1,130.00
$1,452
$1,052.00
$1,529
$1,047.00
Mixed Use - 6G SATA - SFF - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$1,506
$1,076.00
$1,506
$1,076.00
$1,588
$1,219.00
$1,457
$1,041.00
$1,361
$986.00
$939
$671.00
$767
$548.00
$1,229
$842.00
$923
$664.00
$574
$410.00
$448
$320.00
$462
$337.00
$500
$340.00
$486
$347.00
$329
$235.00
$531
$371.00
$517
$372.00
Very Read Optimized - QLC-NAND SATA - SFF - SSD
$2,150
$1,689.00
$1,910
$1,364.00
Solid State Drives - 3.5in LFF SAS
Mixed Use - 12G SAS - LFF -SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$1,165
$832.00
Mixed Use - 12G SAS - LFF - SC Value SAS DS SSD
Solid State Drives - 3.5in LFF SATA
Read Intensive - 6G SATA - LFF - SSD
Mixed Use - 6G SATA - LFF - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$1,235
$908.00
$669
$478.00
$410
$293.00
Solid State Drives - SATA M.2
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only.
NOTE: Installation of the M.2 universal enablment card kit is limited to PCIe slot 1, 2, 3 or 4. Max. in ML350
Gen10 is one M.2 enablment card kit.
NOTE: M.2 supports Software RAID only
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only.
NOTE: M.2 supports Software RAID only
$445
$318.00
Read Intensive - 6G SATA - M.2 - Solid State Drives
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only.
NOTE: M.2 supports Software RAID only
$625
$428.00
Hard Drive Blank Kits
$223
$159.00
$358
$299.00
Networking
1 Gigabit Ethernet adapters
Quickspecs for 647594-B21 - 4 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$145
$98.00
Quickspecs for 615732-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x1
$84
$59.00
Quickspecs for 652497-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$185
$128.00
Quickspecs for 811546-B21 - 4 ports - RJ-45 - 10/100/1000 - PCI Express 2.1 x4
$349
$249.00
10 Gigabit Ethernet adapters
Quickspecs for 652503-B21 - 2 ports - SFP+ -10Gb+ - PCI Express 3.0 x8
$105
$75.00
Quickspecs for 656596-B21 - 2 ports - RJ-45 - 10 Gb - PCI Express 2.0 x8
$175
$125.00
Quickspecs for 727055-B21 - 2 ports - SFP+ - 10 Gb - PCI Express 3.0 x8
$223
$159.00
Quickspecs for 817738-B21 - 2 ports - RJ-45 - 10 Gb - PCI Express 3.0 x4
NOTE: The ML110 Gen10 ships with 2x 1 Gb Embedded.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information:
$385
$275.00
Power Supplies
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet connector
$181
$129.00
$441
$315.00
Cooling Options
NOTE: When one of the following scenarios occurs, the server requires a Redundant Fan with a 800W Redundant Power Supply to be installed
1. When a second HDD cage is installed and the SAS HDDs are running at 15K RPM.
2. When a SAS SSD is installed.
3. If one fan fails, the system will be required to continue operating with a Redundant Fan. This condition is indicated by a flashing amber Health LED
4. When the system requirements are to meet the A3 extended operating environment.
Storage Controllers
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet.
Performance RAID Controllers
NOTE: All performance RAID controllers are supported by the HPE Smart Storage Battery (875241-B21), which supports multiple devices and is sold separately.
Essential RAID Controllers
Optional Upgrades
NOTE: Provides backup power for multiple HPE Smart Array controllers or other devices. Is required with performance RAID controllers
$179
$128.00
USB and SD Options
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
$193
$138.00
Rack Options
Rail Kits
NOTE: Easy install rack rail tray which takes up 1U height in a standard rack facility. This kit is supported in both ML350 and ML110 Gen10 for tower to rack conversion.
$789
$658.00
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
