Sign In or Register
Sales & Support: 1-877-418-3246
0 ITEMS | $0.00 View Cart
 

HP ProLiant BL460c G7 Parts

Ethernet Mezzanine Options
Gigabit Ethernet Mezzanines
HP NC325m PCI Express Quad Port 1Gb Server Adapter for c-Class BladeSystem
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on 2 of the 4 ports.
$122.00 $98.00
HP NC364m Quad Port 1GbE BL-c Adapter
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on only 2 of the 4 ports.
NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000 Mbps, full duplex per port only. For more information, see the "Network Controller" segment in the Standards Features section.
10 Gigabit Ethernet Mezzanines
HP NC522m Dual Port 10GbE Multifunction BL-c Adapter
NOTE: The NC522m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC522m requires a minimum of 2 GB of server memory.
NOTE: The NC522m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.
$375.00 $319.00
HP NC532m Dual Port 10GbE BL-c Adapter
NOTE: The NC532m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC532m requires a minimum of 2 GB of server memory.
NOTE: The NC532m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.
$244.00 $219.00
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
NOTE: The NC542m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure)
NOTE: The NC542m requires a minimum of 2 GB of server memory.
NOTE: The NC542m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC542m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
$225.00
HP NC550m 10GbE 2-port PCIe x8 Flex-10 Ethernet Adapter
NOTE: The NC550m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure)
NOTE: The NC550m requires a minimum of 2 GB of server memory.
NOTE: The NC550m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC550m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
$488.00 $388.00
Back to top
Memory
Registered DIMMS (RDIMMs)
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
NOTE: PC3L is a low voltage memory.
Back to top
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
6G 15K Drives
6G 10K Drives
3G 15K Drives
3G 10K Drives
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
NOTE: Please see QuickSpecs for Technical Specifications and additional information:
NOTE: The hard drive options are not required when configuring a Drive-less Model.
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
SATA Hot Plug 2.5" SFF Entry (ETY) Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SATA Hot Plug 2.5" Midline (MDL) Solid State Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Back to top
Storage Controllers
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13175_na/13175_na.html
Optional Upgrades
HP Smart Array P-Series Low Profile Battery
NOTE: The Smart Array Low Profile Battery supports the HP Smart Array P700m Controller.
NOTE: The Smart Array battery option kit is required to enable battery-backed write cache (BBWC).
$199.00 $138.00
NOTE: The options listed below supports the integrated HP Smart Array P410i.
HP 650 mAh P-Series Battery
NOTE: This kit is only for use with the 256 MB Cache Module.
NOTE: This kit includes the cable required to attach battery to cache.
$99.00 $78.00
HP 512MB P-Series Battery Backed Write Cache Upgrade
NOTE: This kit includes the cable required to attach battery to cache.
$115.00 $95.00
Back to top
I/O Expansion Options
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13220_na/13220_na.html
Back to top
c-Class Mezzanine Options
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12586_na/12586_na.html
Back to top
Ultrium Tape Blades
HP StorageWorks SB1760c Tape Blade
NOTE: LTO-4 Ultrium tape technology.
$3,987.00 $3,588.00
HP StorageWorks SB920c Tape Blade
NOTE: LTO-3 Ultrium technology.
$2,772.00 $2,495.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.html
Back to top
StorageWorks SB40c Storage Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12587_na/12587_na.html
Back to top
Expansion Blade
HP PCI Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe connect board which requires installation.
$887.00 $698.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12753_na/12753_na.html
Back to top

Last updated: 5/22/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP