HP ProLiant SL160z G6 Parts

Unique Options
HP z6000 P212 SAS 4 Hard Drive Power Cable Kit
NOTE: This is required when adding SAS hard drives using the P212 controller.
Out of stock
NOTE: This is required when adding more than two 2.5" hard drives.
HP SL160/170 G6 Power Cable Kit
NOTE: This is needed when adding more than six 2.5" hard drives.
HP z6000 Battery Back Write Cache Hardware Kit 
NOTE: This is required when adding BBWC.
Out of stock
HP z6000 Small Form Factor 2 Drive Cage Kit
NOTE: This is required when adding SFF (2.5") SSD or hard drives.
$155.00
Back to top
Processors
Six-Core Processors
Quad-Core Processors
Dual-Core Processors
HP SL160z G6 Intel® Xeon® E5502 (1.86GHz/2-core/4MB/80W) Processor Kit
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number indicates the performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.
NOTE: Existing SL products cannot be upgraded with 130watt processors, new purchase only
Back to top
Memory
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.
$81.00 $65.00
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.
$63.00 $49.00
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: Maximum 12 DIMMs supported per node.
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:www.hp.com/go/ddr3memory-configurator.
$175.00 $125.00
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient.
NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel)
NOTE: PC3L is a low voltage memory.
Back to top
Drives
NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to the HBA or Controller technical specifications for details. 
NOTE: The hard drives use a quick release carrier.
NOTE: One 2 Drive SFF Drive Cage (582657-B21) is required when installing 2 SFF drives
NOTE: When adding SAS one of the following cable kits needs to be ordered depending on which SAS controller installing - HP P212 SAS 4HDD Cable Kit 574001-B21 or HP P410 SAS 4HDD Cable Kit 583997-B21.
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives - with quick-release (QR) carrier
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives - with quick-release (QR) carrier
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Quick-release Midline Hard Drive
NOTE: HP P212 SAS 4HDD Cable Kit (574001-B21) is needed when adding more than two 2.5" hard drives.
$101.00 $80.00
Back to top
Networking
Gigabit Ethernet Adapters
10 Gigabit Ethernet Adapters
NOTE: No more than two 10GbE I/O devices are supported in a single ProLiant server. 
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:www.hp.com/go/ProLiantNICs.
$97.00 $68.00
Back to top
InfiniBand
QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA
NOTE: Please see the QuickSpecs for additional information:http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04155383
$338.00 $275.00
Back to top
Power Supplies
NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor
HP 1200W Common Slot Platinum Hot Plug Power Supply Kit
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
$111.00 $79.00
Back to top
Storage Controllers
SAS Controllers
Smart Array P212 Controller
NOTE: HP P212 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P212 controller (574001-B21)
Smart Array P410 Controller
NOTE: HP P410 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P410 controller (583997-B21)
Smart Array P411 Controller
Optional Upgrades
NOTE: HP z6000 BBWC HDWR KIT is required when adding BBWC (582653-B21)
HP 256MB P-series Cache Upgrade
NOTE: Supported on HP Smart Array P212 Controller only.
$50.00 $35.00
HP 512MB P-Series Battery Backed Write Cache Upgrade
NOTE: Supported on HP Smart Array P410 Controller and HP Smart Array P411 Controller only.
$188.00 $149.00
HP 650 mAh P-Series Battery
NOTE: To enable BBWC on the 256MB cache.
$201.00 $138.00
NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array P410 Controller, and HP Smart Array P411 Controller only.
HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and Updates Single Server License
NOTE: This part number can be used to purchase a single license or to order multiple licenses with a single activation key. Customers will receive a license entitlement certificate via e-mail. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Include one year of 24x7 HP Software Technical Support Services.
$806.00 $650.00
SCSI HBA
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
(SC11Xe Host Bus Adapter)
$196.00 $159.00
Back to top
Modular Smart Array
Disk Enclosures
$2,219.00 $1,850.00
HP D2700 Disk Enclosure
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
$821.00 $599.00
Back to top
Rack Options
HP SL Universal Switch Rail Kit 
NOTE: This kit allows you to install HP or 3rd party switch in the same rack as SL6000.
$98.00 $78.00
Back to top

Last updated: 11/29/2020

Need help finding the correct part? Live Chat operators are standing by. LET US HELP