Sign In or Register
Now shipping to over 100 countries worldwide!
0 ITEMS | $0.00 View Cart
 

HP ProLiant ML330 G6 Parts

Memory
Registered DIMMs (RDIMMs)
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
Back to top
Optical Drives
NOTE: Please note that some of the earlier BTO models may not support adding SATA Optical Drives. To ensure compatibility of the SATA Optical Drives, please add additional optical drives only on models with Quad-Core 5400 Series.
Back to top
Hard Drive Cage
HP 5U Hot Plug HDD Drive Cage Kit
NOTE: To reach maximum 8 LFF Drive support, it is required to purchase 2 Hot Plug HDD Drive Cage kit and Smart Array controller 8 ports or 2x 4 ports.
$795.00 $778.00
Back to top
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: SATA Hot Plug models require HP SAS Smart Array Controller.
NOTE: SAS Non-Hot Plug and SAS Hot Plug Models require HP SAS Smart Array Controller.
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
SAS Hot Plug 3.5" Midline (MDL) Drives
HP 750GB 3G SAS 7.2K rpm LFF 3.5" Dual Port Midline Hard Drive
461135-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SATA Hot Plug 3.5" Midline (MDL) Drives
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
SATA Hot Plug 3.5" Entry (ETY) Drives
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Back to top
Networking
Gigabit Ethernet Adapters
10 Gigabit Ethernet Adapters
NOTE: A minimum of 2 GB of server memory is required per each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs
Back to top
Power Supplies
It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power supply for your need. The HP Power Advisor is located at: www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor
CAUTION: Optional Power Supplies used for Redundancy "must" match the original supplied power supply. Upgrades for more power headroom, when replacing the original power supplies must match if purchased for redundancy. Option Kits contain optional power supply, an IEC power cable and PDU IEC cables. In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
HP 750W CS HE Power Supply
NOTE: The HP 750W power supply requires purchasing the Redundant Power Supply Enablement Kit (P/N 508544-B21).
$116.00 $89.00
Power Options
HP Redundant Power Supply Enablement Kit
NOTE: The Redundant Power Supply Enablement kit does not integrate any power supply. To enable full Redundancy, it requires 2 units of 750W Power supply.
$387.00 $348.00
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
Back to top
Storage Controllers
SAS Controllers
Smart Array P800 Controller
HP Smart Array P800/512 BBWC Controller
NOTE: Supports internal or external drive attach.
$135.00 $104.00
Smart Array P212 Controller
Smart Array P410 Controller
Smart Array P411 Controller
Upgrade Options
256 MB Cache Module
NOTE: Supported on HP Smart Array P212 and P410/ZM Controllers only.
$44.00 $34.00
512MB BBWC
NOTE: When used with the embedded HP Smart Array P410i controller, this battery module also requires a 24 inch SFP Battery Cable (496029-B21).
$96.00 $74.00
Battery Kit upgrade
NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array P410 Controller, and HP Smart Array P411 Controller only.
$83.00 $64.00
NOTE: Please see the following QuickSpecs additional information:
SAS HBA
NOTE: Please see the HBA QuickSpecs for additional information:
SCSI HBA
HP SC11Xe Host Bus Adapter
NOTE: Recommended HBA for SCSI tape drive connect.
$299.00 $218.00
NOTE: Please see the following QuickSpecs for additional information:
Back to top

Last updated: 3/18/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP
Accepted Credit Cards