Sign In or Register
Sales & Support: 1-877-418-3246
0 ITEMS | $0.00 View Cart
 

HP ProLiant ML150 G6 Parts

Memory
Registered DIMMs (RDIMMs)
Unbuffered DIMMs (UDIMMs)
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient
Back to top
Hard Drive Cage
Hot-plug hard drive disk cage option kit
NOTE: A 2nd hot-plug hard disk drive cage option kit is needed to support more than 4 hard drives.
$795.00 $778.00
Back to top
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to the HBA or Controller technical specifications for details.
NOTE: Mixing SAS and SATA hard drives is allowed. However, only SAS hard drives will be used for RAID setting.
SATA Hot Plug 3.5" Midline (MDL) Drives
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
SATA Hot Plug 3.5" Entry (ETY) Drives
NOTE: The previous generations of 1.5G SATA non-hot plug hard drives are supported. These drives can be purchased as an option. However, they can no longer be configurable.
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
NOTE: SAS hard drives require a SAS HBA or Smart Array Controller.
SAS Hot Plug 3.5" Midline (MDL) Drives
HP 750GB 3G SAS 7.2K rpm LFF 3.5" Dual Port Midline Hard Drive
461135-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Back to top
Power Supplies
750W CS HE Gold Hot Plug Power Supply
NOTE: 750W RPS requires a Redundant Power Supply Enablement Kit 5U G6 (P/N 508544-B21). Two (1) 750W PSUs and one (1) RPS enablement kit are required to achieve redundancy.
$103.00 $80.00
Power Options
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
Back to top
Storage Controllers
SAS Controller
Smart Array P212 Controller
Smart Array P410 Controller
NOTE: To support RAID 5, HP P410 requires at least 256 MB Cache.
NOTE: To support RAID 6, HP P410 requires at least 256 MB Cache + Battery + SAAP or 512MB BBWC + SAAP.
Smart Array P411 Controller
Optional Upgrades
HP 256 MB P-Series Cache Upgrade
NOTE: Supported on HP Smart Array P212 Controller only.
$67.00 $48.00
512MB BBWC
NOTE: Supported on HP Smart Array P410 Controller and HP Smart Array P411 Controller only.
$119.00 $92.00
Battery Kit upgrade
NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array P410 Controller, and HP Smart Array P411 Controller only.
$104.00 $81.00
HP NHP Internal SAS/SATA 4 Port Cable Kit
NOTE: NHP Internal SAS/SATA 4 Port Cable (487734-B21) is required when adding Smart Array P410 Controller on Non-Hot Plug SATA/SAS server models.
$159.00 $155.00
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
SCSI HBA
NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
Back to top

Last updated: 7/17/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP