Sign In or Register
Sales & Support: 1-877-418-3246
0 ITEMS | $0.00 View Cart
 

HP ProLiant DL585 G7 Parts

Memory
NOTE: DIMM banks are active only when the corresponding processor socket is populated.
Registered DIMMs (RDIMMs)
NOTE: Memory must be installed in like-pairs, i.e. two of the same size.
NOTE: Memory bus speeds will operate as follows: 2-4 DIMMs at 800MHz; 6 at 667MHz; 8 at 533MHz.
Back to top
Optical Drives
NOTE: Optical drives are ejectable.
Back to top
Drives
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
6G 15K Drives
6G 10K Drives
3G 15K Drives
3G 10K Drives
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
SATA Hot Plug 2.5" SFF Entry (ETY) Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SATA Hot Plug 2.5" Midline (MDL) Solid State Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Back to top
Networking
Gigabit Ethernet adapters
10 Gigabit Ethernet adapters
NOTE: No more than two10GbE I/O devices are supported in a single ProLiant server.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Back to top
Power Supplies
NOTE: The HP ProLiant DL585 G7 does an inventory of the system configuration to determine what level of redundancy the power supply configuration supports based on some configuration assumptions. The level of redundancy will be reported during the system power on. For planning purposes you can use the Power Advisor at: www.hp.com/go/hppoweradvisor, which is more accurate to determine the power requirements. Also, there is an RBSU override switch capability that allows the user to override the base setting if the Power Advisor indicates redundancy with their configuration.
NOTE: Option Kit contain optional power supply, an IEC power cable and PDU IEC cables.
Back to top
Storage Controllers
SAS Controllers
Smart Array P212 Controller
Smart Array P411 Controller
Smart Array P812 Controller
Optional Upgrades
512MB BBWC
NOTE: Supported on HP Smart Array P411 Controller only.
$115.00 $95.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SAS HBA
HP SC08e 6Gb 2-ports Ext PCIe SAS HBA
NOTE: This is a 2 x4 External Port HBA
NOTE: This is only approved for the HP StorageWorks P2000 G3 SAS Modular Smart Array.
$366.00 $329.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SCSI HBA
HP SC11Xe Host Bus Adapter
NOTE: Recommended HBA for SCSI tape drive connect.
$299.00 $218.00
NOTE: Please see the following QuickSpecs for additional information:
NOTE: Please refer to the HBA QuickSpecs for additional information at:
Back to top

Last updated: 5/22/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP