HP ProLiant DL180 G6 Parts

Unique Options
HP Internal USB Cable G6 Kit
NOTE: This option required to connect a USB device internally.
Out of stock
HP DL180 G6 3PCI-E x8, Full Height Kit
NOTE: This option provides two x8 full-length/full-height slots as well as an additional x8 (x4 electrically) slot. This allows the DL180G6 to have a maximum of four (4) slots.
$184.00 $138.00
HP PCI-X Full Riser DL180 G6 Kit
NOTE: This option kit replaces the three internal expansion slots listed in step 1 base configuration.
NOTE: Optional PCI-X option kit includes: Slot 1: full-length/full-height PCI-X 100; Slot 2: Full length/Full-height PCI-X 100. PCI-X slots are 64 bits; 133 MHz capable if only one PCI-X card is installed in the server.
$177.00 $159.00
HP 2U G6 8HDD LFF DL18X KIT
NOTE: Upgrading to 8 Hot Plug SATA/SAS hard drives requires the addition of a storage controller (Smart Array P410/256MB recommended), two Internal ATA/SAS cables, (mini-SAS cable (496013-B21).
$488.00 $444.00
HP DL180G6 Rear 2LFF Kit
NOTE: Supports 12 hard drive server models only. Hard Drives not included.
NOTE: This option replaces the 2 Full Length, Full Height x8 PCIe slots.
$100.00 $81.00
HP KIT 2PCI-E x8, FH, DL180G6
NOTE: This option provides 2 Full Length, Full Height x8 PCIe slots.
$81.00 $65.00
HP KIT PCI-E x16, DL180G6
NOTE: This option replaces the 2 Full Length, Full Height x8 PCIe slots.
Out of stock

Processors
Quad-Core Processors
$114.00 $92.00
$159.00 $128.00
$112.00 $90.00
NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number indicates the performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.

Memory
RESOURCE: HP/HPE Server Memory Configurator
Registered RDIMMs
Unregistered with ECC UDIMMs
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see:

Drives

NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives

12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives

12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives

6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
NOTE: 3G Hard Drives will operate at up to 3.0 Gb/s in 4 drive models that use the embedded controller.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
NOTE: If selecting more than 4 hard drives or if using SAS hard drives, a Smart Array controller and two SAS/SATA cables (P/N 464830-B21) are required.
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
SAS Hot Plug 3.5" Midline (MDL) Drives
HP 750GB 3G SAS 7.2K rpm LFF 3.5" Dual Port Midline Hard Drive
461135-B21
NOTE: 3G Hard Drives will operate at up to 3.0 Gb/s in 4 drive models that use the embedded controller.
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
SATA Hot Plug 3.5" Midline (MDL) Drives
SATA Hot Plug 3.5" Entry (ETY) Drives

Networking
HP NC364T PCI Express Quad Port Gigabit Server Adapter
NOTE: Does not support Windows 2000.
$99.00 $80.00
HP NC522SFP Dual Port 10GbE Server Adapter
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
$99.00 $80.00
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:

Storage Controllers
SAS Controllers
HP Smart Array P800
HP Smart Array P800/512 BBWC Controller
NOTE: The HP Smart Array P800 controller provides support for external storage on the DL180G6 server. Local storage is supported on the DL180 using either the P212 or P410 controllers.
$94.00 $76.00
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
Optional Upgrades
512MB BBWC
NOTE: Supported on HP Smart Array P410 Controller and HP Smart Array P411 Controller only.
$94.00 $76.00
Battery Kit upgrade
NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array P410 Controller, and HP Smart Array P411 Controller only.
$94.00 $75.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
(Smart Array P800 Controller)
(Smart Array P212 Controller)
(Smart Array P410 Controller)
(Smart Array P411 Controller)
SCSI HBA
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:

Last updated: 12/10/2018
Need help finding the correct part? Live Chat operators are standing by. LET US HELP