Sign In or Register
Sales & Support: 1-877-418-3246
0 ITEMS | $0.00 View Cart
 

HP ProLiant DL180 G5 Parts

Unique Options
HP ProLiant DL180 PCI/X Riser Kit
NOTE: This option kit replaces the three internal expansion slots listed in step 1 base configuration.
NOTE: Optional PCI-X option kit includes: Slot 1: full-length/full-height PCI-X 100; Slot 2: Full length/Full-height PCI-X 100. PCI-X slots are 64 bits; 133 MHz capable if only one PCI-X card is installed in the server.
$332.00 $299.00
Back to top
Optical Drives
NOTE: Optical drives can only be installed on 8 bay hard drive models.
Back to top
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SATA Hot Plug 3.5" Midline (MDL) Drives
SATA Hot Plug 3.5" Entry (ETY) Drives
NOTE: Server BIOS update is required to support 3G SATA drives when configured with embedded SATA controller. Please see communication for details:
SAS Hot Plug 3.5" Midline (MDL) Drives
HP 750GB 3G SAS 7.2K rpm LFF 3.5" Dual Port Midline Hard Drive
461135-B21
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
NOTE: If selecting more than 4 hard drives or if using SAS hard drives a Smart Array controller and two SAS/SATA cables (P/N 464830-B21) are required.
Back to top
Networking
HP NC110T PCI Express Gigabit Server Adapter
NOTE: Does not support Windows 2000.
$132.00 $94.00
HP NC364T PCI Express Quad Port Gigabit Server Adapter
NOTE: Does not support Windows 2000.
$160.00 $124.00
HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter
NOTE: Supported on a Full Length-Full Height slot only.
$118.00 $84.00
HP NC522SFP Dual Port 10GbE Server Adapter
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
$459.00 $399.00
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Back to top
Power Supplies
High Efficiency HP 1200W 12V Hot Plug AC Power Supply
NOTE: Redundant Power Supply configuration for 1200W power supply requires both power supplies to be 1200W. The 1200W and 750W power supplies cannot be mixed.
$143.00 $129.00
Back to top
Storage Controllers
SAS Controllers
HP Smart Array E200 Controller
HP Smart Array E500 Controller
HP Smart Array E500/256MB Controller
NOTE: When ordering a Smart Array E500 Controller with BBWC the addition of the HP SA-P400 and SA-E500 24" Battery Cable Kit (417836-B21) is required.
$320.00 $288.00
HP SA-P400 and SA-E500 24 In Battery Cable Kit
NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array P400 or Smart Array E500 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.
$106.00 $82.00
HP Smart Array P400 Controller
HP Smart Array P400/512MB Controller with BBWC
NOTE: When ordering a Smart Array P400 Controller with BBWC the addition of the HP SA-P400 and SA-E500 24" Battery (417836-B21) is required.
$99.00 $77.00
HP SA-P400 and SA-E500 24 In Battery Cable Kit
NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array P400 or Smart Array E500 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.
$106.00 $82.00
HP Smart Array P800 Controller
Optional Upgrades
Internal SAS/SATA Cable
NOTE: If selecting more than 4 hard drives or if using SAS hard drives a Smart Array controller is required and two SAS/SATA cables.
NOTE: The addition of a Smart Array Controller requires the addition of a SAS/SATA Multi-lane cable.
$132.00 $119.00
SAS HBA
HP SC44Ge Host Bus Adapter
NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
$195.00 $138.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SCSI HBA
HP SC11Xe Host Bus Adapter
NOTE: Recommended HBA for SCSI tape drive connect.
$299.00 $219.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Back to top

Last updated: 8/21/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP