HP ProLiant DL160 Gen9 Parts

Unique Options
HP DL160 Gen9 Low Profile PCIe CPU2 Riser Kit
NOTE: CPU 2 is required if this riser is to be installed, enables one PCIe3 slot.
$249.00
HP DL160 Gen9 Front USB 3.0 Enablement Kit
NOTE: This kit is required to enable a front USB3.0 port on SFF models only.
$175.00
HP DL160 Gen9 FlexibleLOM Enablement Kit
NOTE: This riser kit is required when flexibleLOM is selected.
Back to top
Drives
SAS Hot Plug with Smart Drive SFF (2.5-inch) Enterprise Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise 512e Drives
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
12G SAS Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
12G SAS Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
12G SAS Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
12G SAS Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
6G SATA Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
6G SATA Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
6G SATA Hot Plug SFF Value Endurance (2.5-inch) Enterprise Value G1 Solid State Drives
6G SATA Hot Plug SFF (2.5-inch) Enterprise Light G1 Solid State Drives
6G SATA Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives
6G SATA Hot Plug LFF Value Endurance (3.5-inch) Converter Enterprise Value G1
Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) Enterprise Light G1 Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) Enterprise Boot Solid State Drives
Hard Drive Blank Kits
Back to top
Networking
1 Gigabit Ethernet adapters
10 Gigabit Ethernet adapters
HP Ethernet 10Gb 2-port 561T Adapter
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
$523.00 $422.00
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. See cables/options below.
FlexibleLOM Adapters
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
NOTE: FlexibleLOM riser kit (P/N: 781844-B21) is required when any flexibleLOM is selected. 
$277.00 $250.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:http://www8.hp.com/us/en/products/iss-adapters/index.html#!page=1&view=grid.
Back to top
InfiniBand
HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter
NOTE: Please see the QuickSpecs for additional information:http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04155383
Back to top
I/O Expansion Options
HP DL160 Gen9 Low Profile PCIe CPU2 Riser Kit
NOTE: CPU 2 is required if this riser is to be installed, enables one PCIe3 slot.
$249.00
HP DL160 Gen9 FlexibleLOM Enablement Kit
NOTE: This enablement kit is required when flexibleLOM is selected.
Back to top
Power Supplies
HP Entry-Level Power Supplies
HP Server Redundant Power Supply Backplane Kit
NOTE: Backplane kit is required when 800W/ 900W power supply is selected.
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of the same input voltage, output rating, and efficiency rating. If non-matching power supplies are installed, you may receive an error message and/or experience operational issues with your server.
NOTE: Prior to selecting a power supply option, it is highly recommended that you review your server configuration in the HP Power Advisor tool to determine the right size power supply for your server configuration. The HP Power Advisor is located at:http://www8.hp.com/us/en/products/servers/rackandpower.html#poweradvisor.
Back to top
Cooling Options
HP DL160 Gen9 Redundant Fan Kit
NOTE: This kit includes one fan and is required for enabling fan redundancy with 1P and 2P configurations.
$112.00 $90.00
Back to top
Storage Controllers
SAS Controllers
HP Smart Array Controllers
HP Smart Host Bus Adapters
HP Cable Options
HP DL160 Gen9 8SFF Smart Array P440 SAS Cable Kit
NOTE: One of the above cables is required to be selected depending on the combination of chassis and storage controller. Cable option kit descriptions include the right chassis and storage controller names.
NOTE: NHP CTO Server includes SATA cables required to connect drives to embedded B140i SATA controller.
Optional Upgrades
HP 96W Smart Storage Battery with 145mm Cable for DL/ML/SL Servers
NOTE: This option is mandatorily required with HP Smart Array controllers. One server can accommodate only 1 Smart Storage Battery that would suffice the requirement of all HP Smart Array controllers.
$175.00 $148.00
Back to top
Tape Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape. For hardware and software compatibility of HP tape backup products see: https://h20272.www2.hp.com/spock/ andhttp://www8.hp.com/us/en/products/data-storage/data-storage-solutions.html?compURI=1226240#tab=TAB4.
NOTE: For Internal drives to be connected to DL servers please make sure that you order rack mount kit as well.
Tape Drives
SAS Rack-Mount Tape Solutions
HP DAT Autoloader
HP MSL2024 Tape Library
HP MSL4048 Tape Library
HP StoreEver MSL6480
Back to top
USB and SD Options
HP DL160 Gen9 Front USB 3.0 Enablement Kit
NOTE: This enablement kit is required to enable front 1xUSB3.0 port with 8SFF models.
$175.00
Back to top
Rack Options
Rail Kits
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
HP Rack Mount Consoles
HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor
NOTE: Please see the HP Rack Console QuickSpecs for information on additional options and product specifications.
HP KVM Switches
HP 1x4 USB/PS2 KVM Console Switch
NOTE: To learn more, please visit the HP KVM Switches web page.
HP USB Keyboard and Mouse
HP USB BFR with PVC Free US Keyboard/Mouse Kit
NOTE: Please see the HP USB Keyboard and Mouse QuickSpecs for information on additional options and product specifications.
$144.00 $98.00
Back to top

Last updated: 12/10/2018

Need help finding the correct part? Live Chat operators are standing by. LET US HELP