Sign In or Register
Sales & Support: 1-877-418-3246
0 ITEMS | $0.00 View Cart
 

HP ProLiant DL160 G5 Parts

Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
(Non-Hot Plug Models Only)
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
(SAS/SATA Hot Plug Models Only)
NOTE: A SAS HBA or Array Controller is required.
SATA Hot Plug 3.5" Midline (MDL) Drives
SATA Hot Plug 3.5" Entry (ETY) Drives
NOTE: Server BIOS update is required to support 3G SATA drives when configured with embedded SATA controller. Please see communication for details:
NOTE: Please see QuickSpecs for Technical Specifications and additional information:
Serial-ATA (SATA) Hot Plug 3.5" Hard Drives
SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
NOTE: Please see QuickSpecs for Technical Specifications and additional information:
3.5" SATA Non-Hot Plug Drives
NOTE: The following previous generation of 1.5G SATA Hot Plug hard drives are supported.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SAS Hot Plug 3.5" Midline (MDL) Drives
HP 750GB 3G SAS 7.2K rpm LFF 3.5" Dual Port Midline Hard Drive
461135-B21
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
NOTE: The purchase of SAS HBA or array controller is required.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Back to top
Networking
Gigabit Ethernet Adapters
HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter
NOTE: Supported on a Full Length-Full Height slot only.
$118.00 $84.00
10 Gigabit Ethernet Adapters
HP NC522SFP Dual Port 10GbE Server Adapter
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
$459.00 $399.00
Back to top
Hot Plug HDD Backplane Option
Hot Plug HDD Backplane 1U 2S Kit
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.
Back to top
Storage Controllers
NOTE: The addition of storage controllers for internal hard drive use is intended for use ONLY with the Hot Plug SATA/SAS Model Chassis (P/N 445193-B21).
SAS Controllers
Smart Array E200 Controller
Smart Array E500 Controller
HP Smart Array E500/256MB Controller
NOTE: Standard RAID 0,1, 1+0.
$320.00 $288.00
NOTE: Customers can only order one Smart Array E500/256MB Controller and one Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant DL160 G5 server based on battery space.
Smart Array P400 Controller
HP Smart Array P400/256 Controller
NOTE: Customers can only order one Smart Array P400/256MB Controller and one Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant DL160 G5 server based on battery space.
$72.00 $56.00
HP Smart Array P400/512 Controller with BBWC
NOTE: Customers can only order one Smart Array P400/512MB BBWC Controllers for the HP ProLiant DL160 G5 server based on battery space.
$99.00 $77.00
Smart Array P800 Controller
Optional Upgrades
Battery-backed write cache upgrade
NOTE: When installing a battery-backed write cache module, the HP Smart Array E500 must be installed in the full-length PCI slot. This 256MB Battery-backed write cache upgrade for RAID 5 support.
$95.00 $74.00
512MB Battery-backed write cache upgrade
NOTE: Contains batter and memory module. For Smart Array P400 Controller.
$209.00 $162.00
Riser Board Kits
HP PCI-X Riser Board Kit
NOTE: Replaces the standard Full Height PCI Express slot with a Full Height PCI-X slot.
$149.00 $135.00
HP PCI-X L/P Riser Kit
NOTE: Replaces the standard Half Height (LP) PCI Express slot with a Half Height (LowProfile) PCI-X slot.
$139.00 $125.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SAS HBA
HP 8 Internal Port SAS HBA with RAID
NOTE: For use with Hot Plug SAS/SATA models.
NOTE: The selection HP 8 Internal Port SAS HBA with RAID requires the purchase of the LowProfile PCI-X Riser Option kit (P/N 452698-B21)
NOTE: Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
$97.00 $75.00
HP SC44Ge Host Bus Adapter
NOTE: PCI-Express SAS HBA.
NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
$195.00 $138.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
SCSI HBA
HP SC11Xe Host Bus Adapter
NOTE: Recommended HBA for SCSI tape drive connect.
$299.00 $219.00
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Back to top

Last updated: 7/17/2015

Need help finding the correct part? Live Chat operators are standing by. LET US HELP