HPE ProLiant DL1000 Parts
Memory
Registered DIMMs (RDIMMs)
$49
$38.00
$54
$38.00
$93
$65.00
$56
$39.00
$69
$49.00
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: Maximum 12 DIMMs supported per node.
$57
$38.00
$66
$45.00
NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel)
Optical Media
$199
$188.00
Drives

NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
NOTE: If using SAS hard drives, a Smart Array controller is required. For BTO configurations only, and For 3.5" drive cable kit P/N 519503-B21 or for 2.5" cable kit P/N 519507-B21
SAS Hot Plug 3.5" Midline (MDL) Drives
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
$133
$95.00
$186
$128.00
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SATA Hot Plug 3.5" Entry (ETY) Drives
$216
$159.00
$148
$115.00
SATA Hot Plug 3.5" Midline (MDL) Drives
$312
$248.00
$140
$98.00
$161
$115.00
$141
$109.00
$298
$225.00
$77
$55.00
$184
$148.00
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
$144
$98.00
$83
$58.00
$288
$220.00
SATA Hot Plug Midline (MDL) Solid State Drives
$186
$135.00
$380
$299.00
SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
$166
$134.00
$1,745
$1,229.00
Networking
$68
$49.00

NOTE: Does not support Windows 2000.
$165
$125.00

NOTE: A minimum of two gigabyte (2 GB) of server memory is required per each NC522SFP adapter.
$92
$75.00
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
Storage Controllers
HPE Smart Array P800 Controller
HPE Smart Array P212 Controller
HPE Smart Array P410 Controller
HPE Smart Array P411 Controller
Optional Upgrades

NOTE: Supported on HPE Smart Array P212 Controller only.
$41
$29.00

NOTE: When used with the embedded HPE Smart Array P410i controller, this battery module also requires a 24 inch SFP Battery Cable (496029-B21).
$173
$129.00

NOTE: To enable BBWC on the 256MB cache.
NOTE: Requires 256 MB Cache Module. When used with the embedded HPE Smart Array P410i controller, this battery module also requires a 24 inch SFP Battery Cable (496029-B21).
$207
$156.00
SCSI HBA
$207
$149.00
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Quad-Core Processors
$160
$114.00
$95
$77.00
$114
$92.00
$212
$168.00
$174
$138.00
$113
$90.00
$1,054
$949.00
$197
$156.00