HP ProLiant BL860c Parts
Ethernet Mezzanine Options
HP NC364m Quad Port 1GbE BL-c Adapter
NOTE: Provides four additional Gigabit Ethernet ports per each I/O expansion slot.
HP NC360m Dual Port 1GbE BL-c Adapter
NOTE: Provides two additional Gigabit Ethernet ports per each I/O expansion slot.
Fibre Channel Mezzanine Options
NOTE: The P700M will function as a SAS RAID controller when connected to MDS600 disk subsystem via the StorageWorks 3Gb SAS Switch. In the RAID mode, HP-UX 11iv3 and v2, OpenVMS 8.3-1H1, and Integrity for Windows 6.2 are supported.
NOTE: The P700M will function as a Pass-Thru when connected to the MAS200sa SAS Storage Array via the StorageWorks 3Gb SAS Switch. In the Pass-Thru mode, HP-UX 11i v3 and Integrity for Windows 6.2 are supported.
NOTE: The optional battery is required for RAID 6 and highly recommended for RAID 5 implementations.
NOTE: HP Integrity BL860c processor upgrade kits contain one processor. Processors must be identical. No mixing of processor models is allowed.
NOTE: The Integrity BL860c only supports 1 or 2 processor configurations.
NOTE: Memory Modules consist of pairs of DIMMs
NOTE: DIMMS must be installed in pairs
NOTE: DIMMs must be installed in decreasing capacity with the largest DIMMs installed in the lowest numbered slots.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
6G 15K Drives
6G 10K Drives
3G 15K Drives
3G 10K Drives
HP 36GB 3G SAS 10K 2.5" SFF Single Port Hard Drive
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Last updated: 7/23/2015
Need help finding the correct part? Live Chat operators are standing by. LET US HELP