HP ProLiant BL870c Parts
Out of stock
Out of stock
NOTE: HP Integrity BL870c processor upgrade kits contain one processor. Processors must be identical. No mixing of processor models is allowed.
NOTE: The Integrity BL870c only supports 1, 2, 3 or 4 processor configurations.
NOTE: Memory Modules consist of quads of DIMMs
NOTE: DIMMS must be installed in quads
NOTE: DIMMs must be installed in decreasing capacity with the largest DIMMs installed in the lowest numbered slots.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
6G 15K Drives
6G 10K Drives
3G 15K Drives
3G 10K Drives
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
Fibre Channel Mezzanine Options
InfiniBand Mezzanine Options
NOTE: For Linux support See the HPC Cluster Platform 6000 at: http://www.hp.com/go/hptc
Ethernet Mezzanine Options
Gigabit Ethernet Mezzanines
HP NC364m Quad Port 1GbE BL-c Adapter
NOTE: Provides four additional GbE ports. HP NC 364m Quad Port 1GbE BLc Adapter, (P/N 447883-B21) is supported by HP-UX v3 and v2.)
10 Gigabit Ethernet Mezzanines
HP BLc NC532m NIC Adapter Opt Kit
NOTE: Provides Flex-10 connectivity when used in conjunction with the HP Virtual Connect Flex-10 10Gb Ethernet Module for the c-Class BladeSystem Option (P/N 455880-B21).
NOTE: Supported with HP-UX 11i v3 and Windows; requires 2GB of system memory to be ordered for each card in the blade. To obtain the software and instructions required to run the NC532m in a Windows Integrity environment, please contact: firstname.lastname@example.org
NOTE: The P700M will function as a SAS RAID controller when connected to MDS600 disk subsystem via the StorageWorks 3Gb SAS Switch. In the RAID mode, HP-UX 11iv3 and v2, OpenVMS 8.3-1H1, and Integrity for Windows 6.2 are supported.
NOTE: The P700M will function as a Pass-Thru when connected to the MAS200sa SAS Storage Array via the StorageWorks 3Gb SAS Switch. In the Pass-Thru mode, HP-UX 11i v3 and Integrity for Windows 6.2 are supported.
NOTE: The optional battery is required for RAID 6 and highly recommended for RAID 5 implementations.
Last updated: 6/23/2015
Need help finding the correct part? Live Chat operators are standing by. LET US HELP