HPE ProLiant DL380e Gen8 Parts
Unique Options
NOTE: Upgrades a non-redundant server with additional hot-plug fans.
$72
$54.00
NOTE: With upgrade of 8SFF Cage, there is no Optical Drive support and an additional storage controller is required for 1:1 CTO Server.
$181
$134.00
$113
$90.00
Memory
NOTE: HPE memory from previous generation servers are not fully compatible with Smart Memory features in Gen8 Servers.
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors
$63
$49.00
$73
$55.00
$61
$45.00
NOTE: The following memory is supported by the E5-2400 series Processors
$81
$58.00
$52
$39.00
$75
$55.00
$55
$39.00
$60
$44.00
$69
$49.00
$98
$75.00
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors
$60
$42.00
$162
$112.00
NOTE: The following memory is supported by the E5-2400 series Processors
$181
$124.00
$98
$68.00
$101
$68.00
$165
$118.00
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by E5-2400v2 or E5-2400 series Processors
$147
$105.00
NOTE: PC3L is a low voltage memory.
Optical Media
Drives
NOTE: The HPE ProLiant DL380p Gen8 Smart Storage solutions are equipped with entirely re-designed Small Form Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5 in) hot plug carriers for HPE Qualified Hard Drives and Solid State Drives. These new carriers provide status and activity indicators as well as caution indicators for 'Do Not Remove'.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: All 12G SAS Hard drives only operate at 6G speeds in the DL380pGen8.
Hard Disk Drives - 2.5in SFF SAS
12G SAS Hot Plug with SmartDrive SFF 2.5in Enterprise HDD
12G SAS Hot Plug SFF 2.5in SC 512e HDD
Related Blog Post:
6G SAS Hot Plug with SmartDrive SFF 2.5in Enterprise HDD
6G SAS Hot Plug SmartDrive SFF 2.5in Midline HDD
Hard Disk Drives - 2.5in SFF SATA
6G SATA Hot Plug with SmartDrive SFF 2.5in Midline HDD
6G SATA Hot Plug SFF 2.5in SC 512e HDD
Hard Disk Drives - 3.5in LFF SAS
12G SAS Hot Plug SmartDrive LFF 3.5in Converter Enterprise HDD
12G SAS Hot Plug LFF 3.5in Midline 512e HDD
12G SAS Hot Plug LFF 3.5in SC 512e Performance HDD
6G SAS Hot Plug SmartDrive LFF 3.5in Midline HDD
Hard Disk Drives - 3.5in LFF SATA
6G SATA Hot Plug with SmartDrive LFF 3.5in Midline HDD
6G SATA Hot Plug with SmartDrive LFF 3.5in Midline HDD
6G SATA Hot Plug LFF 3.5in Midline 512e HDD
6G SATA Hot Plug LFF 3.5in SC 512e Performance HDD
Solid State Drives - 2.5in SFF SAS
12G SAS Hot Plug Value Endurance SFF 2.5in Enterprise Value SSD
12G SAS Mainstream Endurance Hot Plug SFF 2.5in Enterprise Mainstream H2 SSD
$1,252
$907.00
$461
$329.00
$422
$315.00
12G SAS Hot Plug SFF 2.5in SC Read/Write Intensive SSD
Solid State Drives - 2.5in SFF SATA
6G SATA 2.5in WI-PLP SCC SSD
6G SATA Hot Plug MU-3 SFF 2.5in SC SSD
6G SATA Hot Plug RI-3 SFF 2.5in SC SSD
6G SATA 2.5in WI-PLP SC SSD
6G SATA 2.5in MU-PLP SC SSD
6G SATA 2.5in RI-PLP SC SSD
6G SATA Value Endurance Hot Plug SFF 2.5in Enterprise Boot SSD
6G SATA Hot Plug Value Endurance SFF 2.5in Enterprise Value G1 SSD
6G SATA Value Endurance Hot Plug SFF 2.5in Enterprise Value SSD
$785
$557.00
$622
$457.00
$366
$275.00
$315
$248.00
$244
$181.00
6G SATA Hot Plug Light Endurance SFF 2.5in Enterprise Light G1 SSD
6G SATA Value Endurance Hot Plug SFF 2.5in Enterprise Value M1 SSD
$532
$391.00
$508
$368.00
$399
$275.00
6G SATA Mainstream Endurance Hot Plug SFF 2.5in Enterprise Mainstream SSD
$599
$499.00
$350
$250.00
$186
$135.00
6G SATA Hot Plug SFF 2.5in SC Read Intensive SSD
Solid State Drives - 3.5in LFF SAS
12G SAS Hot Plug Value Endurance LFF 3.5in Enterprise Value SSD
Solid State Drives - 3.5in LFF SATA
6G SATA Hot Plug LFF 3.5in RI-3 SCC SSD
$1,068
$768.00
$938
$647.00
$858
$604.00
$517
$364.00
$518
$375.00
6G SATA Hot Plug LFF 3.5in MU-3 SCC SSD
6G SATA 3.5in MU-PLP SCC SSD
6G SATA 3.5in RI-PLP SCC SSD
6G SATA Value Endurance Hot Plug LFF 3.5in Enterprise Boot SSD
6G SATA Hot Plug Value Endurance LFF 3.5in Converter Enterprise Value M1 SSD
$534
$384.00
$547
$388.00
$294
$210.00
6G SATA Hot Plug Value Endurance LFF 3.5in Converter Enterprise Value G1 SSD
$387
$287.00
$390
$269.00
6G SATA Value Endurance Hot Plug LFF 3.5in Enterprise Value SSD
$1,053
$726.00
$556
$400.00
$557
$384.00
$551
$385.00
$566
$410.00
6G SATA Hot Plug Light Endurance LFF 3.5in Enterprise Light G1 SSD
6G SATA Mainstream Endurance Hot Plug LFF 3.5in Enterprise Mainstream SSD
$755
$585.00
$490
$329.00
$380
$266.00
6G SATA Hot Plug LFF 3.5in SC Read Intensive SSD
Hard Drive Kits
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server.
NOTE: The part numbers for single HDD blanks below are provided should the customer require replacement HDD blanks for their server.
NOTE: With upgrade of 8SFF Cage/Bkpln (662883-B21), there is no Optical Drive support.
NOTE: All cables necessary for proper installation of the 8SFF Cage are included with this Kit.
NOTE: With upgrade of 8SFF Cage/Bkpln (662883-B21), an additional storage controller is required. HPE recommends the HPE Smart Array P420/1GB FBWC 6Gb 2-ports Int SAS Controller (P/N 631670-B21).
NOTE: The P822 controller has only two internal ports like the P420 controller and cannot be used to attach both 8SFF drive cages through a single controller.
NOTE: In Gen8, the 8+8SFF solution is designed as a performance configuration delivering maximum IOPS across the two drive cages. Customers seeking to have all drives in a single volume should consider the DL380p Gen8 25 SFF Configure-to-order Server (P/N 665554-B21) as a base.
$173
$125.00
Hard Drive Cables
Networking
Gigabit Ethernet adapters
Quickspecs for 647594-B21 - 4 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$145
$98.00
Quickspecs for 615732-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x1
$84
$59.00
Quickspecs for 652497-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$185
$128.00
10 Gigabit Ethernet Adapters
Quickspecs for 652503-B21 - 2 ports - SFP+ -10Gb+ - PCI Express 3.0 x8
$105
$75.00
Quickspecs for 656596-B21 - 2 ports - RJ-45 - 10 Gb - PCI Express 2.0 x8
$175
$125.00
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
$105
$75.00
InfiniBand
I/O Expansion Options
NOTE: This kit provides three slots that run off of first processor.
$113
$90.00
NOTE: This kit provides two additional slots that run off of second processor.
$767
$548.00
Power Supplies
NOTE: Mixing of power supplies in the same server is not supported. All power supplies inside a server must be exactly the same model. Mixing Gold, Platinum, and Platinum Plus certified power supplies is not supported.
NOTE: Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at: (link)
HPE Common Slot Titanium Power Supply Kits
NOTE: The above Power Supplies offer 96% Efficiency with support for Intelligent Power Discovery.*
$126
$95.00
HPE Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supplies offer 94% efficiency with support for Intelligent Power Discovery.
$99
$69.00
HPE Common Slot Gold Power Supplies
HPE Common Slot -48VDC Power Supplies
NOTE: The HPE 750W Common Slot -48VDC power supply does not ship with a power cable. It has been designed with a terminal block connection allowing for custom design of power cords by the user.
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
$488
$399.00
Graphic Options
NOTE: The adapter kit is used to provide power to high-wattage cards
$483
$350.00
(example: graphics cards) that require up to 225W of power.
NOTE: High wattage cards are supported on the x16 FL/FH slot which is controlled by the second processor. p/n 661628-b21 is required.
NOTE: Because of a single x16 FL/FH slot, we support only one of the below graphic cards at a time.
NOTE: Only the following OS types are supported: 64-bit Only: Red Hat Enterprise Linux 5.x, Red Hat Enterprise Linux 6.x, SUSE Linux Enterprise Server 11 SPx. 64-bit Only: Windows Server 2008 R2 SPx.
$537
$395.00
Cooling Options
NOTE: This kit contains a single fan and is used to upgrade non-redundant configurations to redundant configurations.
$72
$54.00
Storage Controllers
SAS Controllers
Smart Array P222 Controller
Smart Array P420 Controller
Smart Array P421 Controller
HPE Smart Array P430 Controller
HPE Smart Array P431 Controller
Smart Array P822 Controller
HPE Smart Array P830 Controller
Optional Upgrades
$63
$45.00
NOTE: This kit includes a cable and cache module that is used in conjunction with the B320i controller.
$98
$71.00
Host Bus Adapter
SCSI HBA
Storage Options
Storage Fibre Channel HBA
Brocade Fibre Channel HBAs
Emulex Fibre Channel HBAs
QLogic Fibre Channel HBAs
Converged Network Adapter
$177
$129.00
Rack Options
HPE LCD8500 1U Rackmount Console Kit Models
HPE LCD8500 1U Rackmount Console Kit Options
HPE Location Discovery Services
HPE USB Keyboard and Mouse
HPE Server Console Switches
HPE Server Console Switch G2 with Virtual Media & CAC
HPE IP Console Switch G2 with Virtual Media & CAC
Rail Kits
NOTE: Gen8 rail kits have changed significantly from prior generation rail kits. Please take a moment to review the installation documentation that comes with the server to help you with the installation of your Gen8 server.
NOTE: Rail kits are optional for DL380e Gen8 and are no longer included standard with the server. Customers have the option to purchase their server without a rail kit.
NOTE: Ball bearing rail kits contain telescoping rails which allow for in-rack serviceability.
NOTE: The HPE 2U Gen8 Cable Management Arm is not available when using Friction Rails.
NOTE: To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative (p/n 695539-001).
Caution: HPE recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
USB and SD Options
HPE Flash Media Kits for USB Drives
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
Processors
| NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
E5-2400v2 series CPU Kits
Entry Processors - E5-2400v2 series
NOTE: All support up to 1333MHz memory speeds.
Base Processors - E5-2400v2 series
NOTE: All support up to 1600MHz memory speeds.
$2,311
$1,639.00
Performance Processors - E5-2400v2 series
NOTE: All support up to 1600MHz memory speeds.
$1,185
$975.00
E5-2400(v1) series CPU Kits
Entry Processors - E5-2400 series
NOTE: All support up to 1066MHz memory speeds.
Base Processors - E5-2400 series
NOTE: All support up to1333MHz DDR3 memory speeds.
Performance Processors - E5-2400 series
NOTE: All support up to 1600MHz DDR3 memory speeds.
NOTE: Up to 2 processors supported.
NOTE: HT indicates that the processor model supports Intel /Hyper-Threading Technology
NOTE: Turbo2: Intel Turbo Boost Technology 2.0 provides more computing power when you need it with performance that adapts to spikes in your workload and delivers more performance upside than then previous generation turbo technology.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel C600 Chipset E5-2400 and E5-2400 v2 Series, the letter preceding the model number indicates the Product Line (E3, E5, E7); 2400x v#, 2 = number of CPUs in a Node, 4 is socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and v# = version number.
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
