HPE ProLiant SL4540 Gen8 Parts
Memory
NOTE: Please choose memory options for the second processor of each node. Up to 6 DDR3 DIMM slots are dedicated per socket.
NOTE: HPE certified SmartMemory must be used to guarantee full 1333MHz speeds.
Registered DIMMs (RDIMM) - For E5-2400 v2 Series Processors
NOTE: The Following memory is supported by E5-2400 v2 series processors
$63
$49.00
$73
$55.00
$61
$45.00
$81
$58.00
Registered DIMMs (RDIMM) - For E5-2400 Series Processors
NOTE: The Following memory is supported by E5-2400 series processors
$52
$39.00
$55
$39.00
$98
$75.00
Drives
NOTE: For the 1x60 model, choose up to a total of 60 LFF 3.5" hard drives from the following options using any mix of SAS/SATA/SSD hard drives for desired performance and up to a total of 2 SFF 2.5" hard drives from the following options for OS, boot or additional storage purposes.
NOTE: For the 2x25 model, choose up to a total of 25 LFF 3.5" hard drives per server node from the following options using any mix of SAS/SATA/SSD hard drives for desired performance and up to a total of 2 SFF 2.5" hard drives per server node from the following options for OS, boot or additional storage purposes.
NOTE: For the 3x15 model, choose up to a total of 15 LFF 3.5" hard drives per server node from the following options using any mix of SAS/SATA/SSD hard drives for desired performance and up to a total of 2 SFF 2.5" hard drives per server node from the following options for OS, boot or additional storage purposes.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components for the subsystem.
SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives
6G SATA Value Endurance Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
$556
$400.00
$557
$384.00
$551
$385.00
$566
$410.00
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
$599
$499.00
$350
$250.00
$186
$135.00
6G SATA ME Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives
$755
$585.00
$490
$329.00
$380
$266.00
12G SAS Value Endurance Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
$1,448
$985.00
$2,406
$1,925.00
12G SAS Value Endurance Hot Plug LFF (2.5-inch) Enterprise Value Solid State Drives
$875
$625.00

NOTE: 12G SAS SSDs operate at 6G when deployed in SL4540 Gen8.
$1,189
$849.00
Networking
Gigabit Ethernet Adapters


$145
$98.00
10 Gigabit Ethernet adapters


$105
$75.00


$175
$125.00

NOTE: Need to order HPE SL454x Storage Mezzanine to PCIe Enablement Kit to enable the low profile PCIe slot.
$105
$75.00
NOTE: These are additional expansion options and only one may be selected per server node.
Optical Adapters
$68
$49.00
$161
$115.00
$249
$178.00

NOTE: The adaptors listed will function with single mode fiber cable designed to fit in an SFP/SFP+ transceiver
$91
$65.00
InfiniBand
$161
$128.00
Power Supplies
NOTE: - Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at:- (link)
HPE Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supplies offer 94% efficiency with support for Intelligent Power Discovery
HPE Common Slot Gold Power Supplies
NOTE: The following power supplies offer up to 92% efficiency.

NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
$83
$59.00
HPE Common Slot -48VDC Power Supplies

NOTE: The HPE 750W Common Slot -48VDC power supply does not ship with a power cable. It has been designed with a terminal block connection allowing for custom design of power cords by the user to select an alternative power cord for your server, please review the HPE Common Slot Power Supplies QuickSpecs.
$488
$399.00
I/O Accelerator Options
Second Generation Accelerators

NOTE: Need to order HPE SL454x Storage Mezzanine to PCIe Enablement Kit to enable the low profile PCIe slot.
$790
$586.00
NOTE: These are additional expansion options and only one may be selected per server node.
Storage Controllers

SAS Controllers
Smart Array P421 Controller
Smart Array P431/4G Controller
Optional Upgrades

NOTE: The HPE 12in Super Cap is a required option to implement a HPE Smart Array Controller with Flash.
$67
$47.00
$63
$45.00
Host Bus Adapter

NOTE: Need to order HPE SL454x Storage Mezzanine to PCIe Enablement Kit to enable the low profile PCIe slot.
$486
$360.00
NOTE: These are additional expansion options and only one may be selected per server node.
Tape Backup
HPE LTO Ultrium Half-Height Tape Drives
$4,868
$3,606.00
HPE StoreEver 1/8 G2 Tape Autoloader
HPE StoreEver MSL6480
$16,500
$12,500.00
Tape Storage Systems
HPE StoreEver MSL6480
$16,500
$12,500.00
Disk Storage Systems
Disk Enclosures
$8,768
$6,850.00
Rack Options
HPE TFT7600 G2 KVM Console and Monitor (TFT7600 G2)
HPE Server Console Switches
HPE Server Console Switch G2 with Virtual Media & CAC
HPE IP Console Switch G2 with Virtual Media & CAC
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
NOTE: Please choose Processor options for the second processor of each server node.
E5-2400 v2 Series Processors
Ten-Core Processors
Eight-Core Processors
Six-Core Processors
Four-Core Processors
E5-2400 Series Processors
Eight-Core Processors
Six-Core Processors
Quad-Core Processors

NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
$225
$176.00