HPE ProLiant ML30 Gen11 Parts

HPE ProLiant ML30 Gen11 Parts

Upgrade and maintain your HPE ProLiant ML30 Gen11 tower server with fully compatible parts and components. Ideal for growing businesses, branch offices, and remote deployments, the ML30 Gen11 supports Intel Xeon E-Series processors and the latest DDR5 memory and PCIe Gen4 technologies.

Available ML30 Gen11 Parts:

  • Memory: DDR5 ECC UDIMMs
  • Drives: SATA, SAS, and NVMe storage
  • Storage Controllers: Gen11 Smart Array RAID and HBA cards
  • Networking: 1GbE and 10GbE PCIe Ethernet adapters
  • Power Supplies: Redundant hot-plug PSU modules
  • Processors: Intel Xeon E-2400 Series CPUs

Looking for a specific ML30 Gen11 part? Browse the subcategories below or contact us for expert support.

Memory

Unbuffered DIMMs (ECC UDIMMs)

Drives

Hard Disk Drives

Enterprise - 12G SAS -- SFF Basic Carrier Drives

Midline - 12G SAS - LFF Low Profile Carrier Drives

Midline - 6G SATA - LFF Low Profile Carrier Drives

6G SATA - LFF NHP/Raw Drives

ML30 Gen10 Plus supports up to SAS 12G. Performance downgraded to 12G is expected once SAS

HPE Solid State Drives

Read Intensive -- 24G SAS - SFF Basic Carrier Solid State Drives

Mixed Use -- 12G Value SAS - SFF Basic Carrier Solid State Drives

Read Intensive -- 12G Value SAS - SFF Basic Carrier Solid State Drives

Mixed Use -- 6G SATA - SFF Basic Carrier Solid State Drives

Read Intensive -- 6G SATA - SFF Basic Carrier Solid State Drives

Read Intensive -- 6G SATA - LFF Low Profile Carrier Solid State Drives

Read Intensive - NVMe - M.2 - Solid State Drives

Boot Devices

HPE Boot Controllers

The N204i-u Boot device includes 2x 480GB M.2 NVMe SSDs, with preconfigured hardware RAID1. For additional information, please see the HPE OS Boot Device QuickSpecs.
Selection of the HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device requires selection of the HPE ProLiant ML30 Gen11 NS204i-u Hot Plug Boot Optimized Storage Device Cable Kit. Both the device and the enablement kit are required to be selected together.
The HPE N204i-u Boot device and Optical Disk Drives cannot be selected together

Storage Controllers

Essential RAID Controllers

HPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Cache) 12G SAS PCIe Plug-in Controller thumb
To be used for external storage only.
Must select 1pc of Mini SAS Cable Kit (P06307-B21) for 4LFF Hot Plug Server.
Must select 2pcs of Mini SAS Cable Kit (P06307-B21) for 8SFF Hot Plug Server.
Does not support Non Hot Plug Server
$333
$250.00

HPE Tri-Mode Controllers

Tri-Mode controllers are not supported on the 4LFF Non-Hot Plug Model Server.
Max 1 pc of MR416i-p or MR216i-p can be selected for better performance.
Must select 1pc HPE ML30 Gen10+ BCM Cable Kit (P57104-B21) for 4LFF Hot Plug Server.
Must select 1pc HPE ML30 Gen11 SFF PCIe Cable Kit (P67850-B21) for 8SFF Hot Plug Server.
Tri-Mode controller selection requires selection of either P01367-B21 - HPE 96W Smart Storage Lithiumion Battery with 260mm Cable Kit or P02381-B21 - HPE Smart Storage Hybrid Capacitor with 260mm Cable Kit

Energy Packs

HPE ML150 Gen9 Smart Storage Battery Holder Kit thumb
Provides backup power for multiple HPE Smart Array controllers or other devices. Is required with performance RAID controllers.
Max storage battery qty to be one per DL20 Gen11 server
HPE 96W Smart Storage Battery 260mm Cable (P01367-B21) and HPE Smart Hybrid Capacitor w/ 260mm Cable P02381-B21) cannot be selected together.
A Battery holder is required: HPE Gen9 Smart Storage Battery Holder Kit (786710-B21).

Networking

1 Gigabit Ethernet adapters

10 Gigabit Ethernet adapters

25 Gigabit Ethernet adapters

Any PCIe card selection requires selection of the HPE ML30 Gen11 Front PCI Fan and Baffle Kit (P65106-B21)
SAS controllers (internal and external) and PCIe Gen5 x16 card cannot be selected together as both need to be installed on slot 1
If controller x8 and PCIe x8 card is selected together, then the controller should be installed on Slot 1 and PCIe x8 card on slot 2
Compare Selected