HPE ProLiant ML30 Gen10 Parts
Extend the life of your HPE ProLiant ML30 Gen10 server with genuine replacement and upgrade parts. The ML30 Gen10 is a powerful entry-level tower server ideal for small businesses and branch offices.
Available ML30 Gen10 Parts:
- Memory: DDR4 ECC UDIMM modules
- Drives: SATA and SAS SSDs and HDDs
- Storage Controllers: HPE Smart Array and HBA cards
- Networking: PCIe Ethernet NICs
- Power Supplies: Fixed and redundant PSU options
- Processors: Intel Xeon E-2100/E-2200 and Core i3/i5 CPUs
✅ Looking for a specific ML30 Gen10 part? Browse the subcategories below or contact us for help.
Unique Options
Notes: Required if ODD is in the order.
Notes:
- Included in pre-configured Performance Models.
- Must be selected in 4LFF Hot Plug CTO Server and 8SFF Hot Plug CTO Server.
- Must be selected in 4LFF NHPE CTO Server and pre-configured Entry Model if M.2 SSD or any PCIe card (NIC, Smart Array Controller, graphic card, etc.) is selected except the E208e-p controller and 1Gb network adapters.
Notes: Required if P408i-p/E208i-p is selected. Select one cable kit for 4LFF Hot Plug Server, two for 8SFF Hot Plug Server.
Notes: Required for HPE 500W Flex Slot Power Supply.
Notes:
- This kit includes one dedicated iLO module and one serial port cable, with one M.2 slot on the module for M.2 SSD installation.
- M.2 SSD is supported with or without this option on ML30 Gen10.
$350
$265.00
Notes: Easy install rack rail tray which takes up 1U height in a standard rack facility. This conversion kit only provides shelf function for ML30 Gen10 and does not support Cable Management Arm.
$789
$658.00
Notes: UEFI is the default, this FIO part can be used for CTO to enable Legacy mode.
$144
$99.00
Notes:
- Replaces iLO default randomized password by an HPE defined common password. HPE highly recommends changing this password immediately after the initial onboarding process..
- Customers who want to choose their own custom iLO default password should use the HPE Factory Express Integration Services.
Notes: 1pc required per LTO int tape drive or per RDX USB int disk backup sys for power connection if selected together with 350W Power Supply (820303-B21 or P21652-B21).
Memory
Unbuffered DIMMs (UDIMMs)
$234
$158.00
Notes: Running at 2400 MT/s with Intel® Core™ i3 and Pentium® G families due to processor limitation.
$333
$238.00
Optical Media
Notes: The HPE ML30 Gen10 Slim Optical Disk Drive Enablement Kit (P06309-B21) is required for this option.
$103
$75.00
Notes: The HPE ML30 Gen10 Slim Optical Disk Drive Enablement Kit (P06309-B21) is required for this option.
$185
$159.00
$385
$275.00
Drives
HPE HDD
Enterprise - 12G SAS - SFF HDD
Enterprise - 12G SAS - LFF HDD
Midline - 12G SAS - SFF HDD
Midline - 12G SAS - LFF HDD
$729
$536.00
Midline - 6G SATA - SFF HDD
Midline - 6G SATA - LFF HDD
$1,222
$819.00
6G SATA - LFF NHP/Raw HDD
HPE SSD (Solid State Drives)
Write Intensive - 24G SAS - SFF - SSD
Notes: ML30 Gen10 supports up to SAS 12G, performance downgraded to 12G is expected once SAS 24G drive is installed in ML30 Gen10 system.
$1,116
$797.00
Read Intensive - 6G SATA - SFF - SSD
$1,033
$748.00
$1,770
$1,292.00
$1,544
$1,103.00
$1,452
$1,052.00
$1,582
$1,130.00
$1,910
$1,364.00
$1,872
$1,337.00
$1,872
$1,337.00
$2,150
$1,689.00
Read Intensive - 6G SATA - LFF - SSD
Mixed Use - 6G SATA - SFF - SSD
$499
$364.00
$486
$347.00
$531
$371.00
$329
$235.00
$462
$337.00
$448
$320.00
$1,500
$1,049.00
$939
$671.00
$1,229
$842.00
$767
$548.00
$1,529
$1,124.00
$1,506
$1,076.00
$1,506
$1,076.00
$1,588
$1,219.00
$1,506
$1,076.00
$1,457
$1,041.00
Mixed Use - 6G SATA - LFF - SSD
$952
$680.00
Read Intensive - NVMe - M.2 - SSD
Notes:
- M.2 SSD can be installed either on system board or on dedicated iLO module (P06687-B21).
- Running at PCIe 3.0 x2 speed on ML30 Gen10.
- HPE ML30 Gen10 Front PCI Fan and Baffle Kit (P06303-B21) is required to support these drives.
- Not supported by HPE Smart Array controllers.
$687
$491.00
Networking
Notes: Max 2 pcs of HPE Networking Adapters can be selected for better performance.
1 Gigabit Ethernet adapters
10 Gigabit Ethernet adapters
Notes: HPE ML30 Gen10 Front PCI Fan and Baffle Kit (P06303-B21) is required for 10Gb adapters.
$175
$125.00
Notes: Max 1 pc of HPE Ethernet 10Gb 2-port BASE-T X550-AT2 Adapter can be selected.
$343
$245.00
$223
$159.00
Power Supplies
Notes: Up to one is allowed.
Notes: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet connector.
$182
$137.00
Notes: Required for HPE 500W Flex Slot Power Supply.
HPE Security
Notes:
- HPE Trusted Platform Module 2.0 option works with Gen10 servers with UEFI Mode not LegacyMode. It is not compatible with HPE ProLiant Gen8 servers or earlier generation variants.
- HPE server systems can have a TPM module (of any type) installed only once. It cannot be replaced with any other TPM module.
$189
$135.00
Notes:
- This is a FIO setting to allows the TPM 2.0 module to operate in a TPM 1.2 mode.
- This option must be selected only with TPM 2.0 Gen10 Option (864279-B21).
Storage Controllers
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet
Notes: Max 2 pcs of HPE Smart Array Controllers can be selected for better performance.
Performance RAID Controllers
Notes: All performance RAID controllers require the HPE Smart Storage Battery (P01366-B21), which supports multiple devices and is sold separately.
Notes:
- Max 1 pc of P408i-p can be selected for better performance.
- Must select 1pc of Mini SAS Cable Kit (P06307-B21) for 4LFF Hot Plug Server.
- Must select 2pcs of Mini SAS Cable Kit (P06307-B21) for 8SFF Hot Plug Server.
- Does not support Non Hot Plug Server.
$375
$268.00
Essential RAID Controllers
Notes:
- Must select 1pc of Mini SAS Cable Kit (P06307-B21) for 4LFF Hot Plug Server.
- Must select 2pcs of Mini SAS Cable Kit (P06307-B21) for 8SFF Hot Plug Server.
- Does not support Non Hot Plug Server.
$245
$184.00
Optional Software
$499
$388.00
Notes: SmartCache is offered on HPE Smart Array performance RAID controllers.
$399
$349.00
Optional Upgrades
Notes:
- Provides backup power for multiple HPE Smart Array controllers or other devices. Is required with performance RAID controllers.
- A Battery holder is required: HPE Gen9 Smart Storage Battery Holder Kit (786710-B21).
$277
$185.00
Processors
| NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
Intel Xeon E-2200Series
Intel Core i3 Processors
Intel Pentium Processor G Series
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
