HPE ProLiant MicroServer Gen8 Parts

HPE ProLiant MicroServer Gen8 Parts

HPE ProLiant MicroServer Gen8 Parts

Unique Options

HPE MicroServer Gen8 Front Bezel Faceplate Kit thumb
NOTE:  This kit includes all three Front Bezel Faceplate colors (Blue, Red and Black).

Drives

NOTE:  The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.

6G SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives

Networking Switches

HPE PS1810-24G Switch thumb
NOTE:  HPE PS1810 Series Switches have been custom designed to work with the HPE ProLiant MicroServer Gen8. These are layer 2 web-managed gigabit switches with two offerings - 8 port and 24 port models. PS1810 Switches have built-in technology that will enable automatic discovery of ProLiant Gen8 Servers. In addition the 8 port switch had a unique chassis design that enables physical stacking on the MicroServer.

Storage Controllers

SAS Controllers

Smart Array P222 Controller

HPE Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext SAS Controller thumb
NOTE:  HPE Smart Array P22/512 FBWC qualified for RAID support only for HPE ProLiant MicroServer Gen8.
€137
€80.63

Rack Options

HPE USB Keyboard and Mouse

USB and SD Options

HPE Flash Media Kits for USB Drives

NOTE:  HPE qualified blank USB key for use with HPE ProLiant servers that support the VMware virtualization environment and other HPE value-add software. HPE recommends this industry standard USB flash device for use with VMware ESXi. USB device must be installed in the internal slot of the ProLiant server for use with VMware ESXi. Refer to HPE VMware Getting Started Guide for installation instructions.

HPE Enterprise Mainstream Flash Media Kits for Memory Cards

Compare Selected