Global One Technology is open normal hours and is not experiencing any fulfillment delays during the COVID-19 pandemic.
 

HP ProLiant BL460c Gen9 Networking Adapters

NOTE: A 10 Gigabit Ethernet adapter supports linking at 1Gbps or 10Gbps when connected to an interconnect module with 10Gb Ethernet downlinks. 
NOTE: A 10 Gigabit Ethernet adapter supports linking at only 1Gbps when connected to an interconnect module with 1Gb Ethernet downlinks. 
NOTE: The 10 Gigabit Ethernet adapters on each server blade connect to a 10Gb interconnect in bays 3-6 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP BladeSystem c3000 Enclosure).
20 Gigabit Ethernet Mezzanine Cards
HP FlexFabric 20Gb 2-port 630M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04312720
$693.00 $495.00
HP FlexFabric 20Gb 2-port 650M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04347342
$1,321.00 $950.00
10 Gigabit Ethernet Mezzanine Cards
HP FlexFabric 10Gb 2-port 534M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:http://h18000.www1.hp.com/products/quickspecs/14619_na/14619_na.html
$795.00 $599.00
HP Ethernet 10Gb 2-port 560M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:http://h18000.www1.hp.com/products/quickspecs/14478_na/14478_na.html.
$950.00 $875.00
HP Ethernet 10Gb 2-port 570M Adapter
NOTE:Onlysupported in Legacy BIOS mode.
$2,650.00
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04227607
1 Gigabit Ethernet Mezzanine Cards
HP Ethernet 1Gb 4-port 366M Adapter 
NOTE: Please see QuickSpecs for technical specifications and additional information at:http://h18000.www1.hp.com/products/quickspecs/14335_na/14335_na.html
$448.00 $361.00
FlexibleLOM Adapters
NOTE: The server supports one (1) FlexibleLOM that is installed in the FlexibleLOM connectors and is already included in the pre-configured models. However, it must be added in Step 2 for Configure-to-Order Models. The FlexibleLOM options below are used to change these original FlexibleLOMs. 
20Gb FlexibleLOM Adapters
HP FlexFabric 20Gb 2-port 630FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04312719
$237.00 $188.00
HP FlexFabric 20Gb 2-port 650FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04347341
$227.00 $180.00
10Gb FlexibleLOM Adapters
HP FlexFabric 10Gb 2-port 536FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04347246
$122.00 $92.00
HP Ethernet 10Gb 2-port 560FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111193
$108.00 $85.00
HP Ethernet 10Gb 2-port 570FLB Adapter
NOTE:Onlysupported in Legacy BIOS mode.
$1,750.00
NOTE: Please see QuickSpecs for technical specifications and additional information  at http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04312718
HP Infiniband Mezzanine Adapters
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active (regardless of operating mode). When installed in mezzanine slot 2, both ports are active. 
NOTE: InfiniBand QDR and FDR speeds are only supported on the HP BladeSystem c7000 Enclosure. For additional information, please see the HP BladeSystem c7000 Enclosure and InfiniBand QuickSpecs at:http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04135582
HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter
NOTE: The QDR InfiniBand adapter may be installed in either mezzanine slot of the server.
HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter
NOTE: The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode and may be installed in either mezzanine slot if operated in any other mode.
Back to top

Last updated: 7/15/2020

Need help finding the correct part? Live Chat operators are standing by. LET US HELP