HPE ProLiant DL360 G7 Hard Drives
HPE ProLiant DL360 G7 Hard Drives
Upgrade your DL360 G7 with high-performance SAS and SATA drives. We offer both solid-state and spinning disk options to match your needs—whether you're after speed, capacity, or reliability.
Drive Compatibility:
- 6G SATA and SAS interfaces
- 2.5" SFF and 3.5" LFF form factors
- Read Intensive, Mixed Use, and Write Intensive SSDs
✅ Need help picking the right drive? We can assist with compatibility and performance planning.
The HPE ProLiant DL360 G7 (Generation 7) server can support up to eight (8) 2.5" SFF (small form factor) hot plug hard drives.
You can use either SAS, SATA, or Solid State drives in the DL360 G7. Most customers opt for Enterprise SAS drives due to the superior performance - faster data transfer rates and spindle speeds. See the full list of available drives below. Feel free to contact us via Live Chat with with questions about hard drives for DL360G7 servers.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
Compare Selected