HPE ProLiant BL465c G7 Parts
Ethernet Mezzanine Options
Gigabit Ethernet Mezzanines

NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on only 2 of the 4 ports.
CHF 61
CHF 44.60
CHF 72
CHF 57.35

NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on only 2 of the 4 ports.
CHF 65
CHF 47.79
CHF 48
CHF 33.45
10 Gigabit Ethernet Mezzanines

NOTE: The NC532m requires a minimum of 2 GB of server memory.
NOTE: The NC532m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.
CHF 116
CHF 78.06

NOTE: The NC542m requires a minimum of 2 GB of server memory.
NOTE: The NC542m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC542m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
CHF 51
CHF 39.03

NOTE: The NC550m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 3-4 (HPE BladeSystem c3000 Enclosure)
NOTE: The NC550m requires a minimum of 2 GB of server memory.
NOTE: The NC550m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC550m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
CHF 255
CHF 173.64

NOTE: The NC551m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 3-4 (HPE BladeSystem c3000 Enclosure)
NOTE: The NC551m requires a minimum of 2 GB of server memory.
NOTE: The NC551m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC551m supports 1000Mbps when connected to a 1Gb Ethernet interconnect.
CHF 77
CHF 61.33
CHF 73
CHF 50.98
NOTE: A 10 Gigabit Ethernet adapter is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 2-4 (HPE BladeSystem c3000 Enclosure).
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server memory.
NOTE: A 10 Gigabit Ethernet adapter will down speed to 1Gb if paired with a 1GbE interconnect.
NOTE: HPE recommends 10Gb adapters be installed in a x8 PCIe slot for optimal performance.
NOTE: The ROM Based Setup Utility (RBSU) feature allows for the configuring of a FlexFabric Adapter to any of the supported protocols. For example iSCSI to FCoE (Fibre Channel over Ethernet). Note that a HPE Virtual Connect profile takes precedence over the setting in this menu. Also, some FlexFabric Adapters may require that network boot be enabled in order to configure the protocol. If the protocol is configured without enabling network boot with certain FlexFabric Adapters, the protocol may not take effect. Once the protocol has taken effect on the first boot after configuring this option, network boot may be disabled if desired.
Fibre Channel Mezzanine Options
4Gb Fibre Channel Mezzanines
CHF 50
CHF 39.83
CHF 50
CHF 35.05
8Gb Fibre Channel Mezzanines
CHF 53
CHF 43.01
CHF 57
CHF 46.20
CHF 159
CHF 117.88
Memory
Registered DIMMs (RDIMMs)
CHF 53
CHF 39.03
CHF 65
CHF 44.60
CHF 76
CHF 61.33
CHF 54
CHF 39.03
CHF 75
CHF 60.53
Unbuffered with ECC DIMMs (UDIMMs)
CHF 66
CHF 53.37
CHF 194
CHF 174.43
NOTE: A minimum of one (1) DIMM per processor is required.
NOTE: Each processor memory bus will operate at up to 1333 MHz with either one quad-rank (QR) or two single-rank/dual-rank (SR/DR) DIMMs per processor memory channel and 1066 MHz with up to two QR or one QR and one SR/DR DIMMs per processor memory channel with standard voltage (1.5V, PC3) DIMMs. Memory bus will operate one speed slower when low voltage (1.35V, PC3L) memory is installed. Memory bus speeds may be further limited by the speed of the memory used as well.
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
CHF 339
CHF 199.13
CHF 382
CHF 258.86
CHF 182
CHF 131.42
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
CHF 288
CHF 168.86
CHF 212
CHF 124.25
CHF 386
CHF 277.98
CHF 238
CHF 166.47
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
CHF 95
CHF 67.70
CHF 47
CHF 33.45
CHF 50
CHF 35.84
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
CHF 91
CHF 63.72
CHF 104
CHF 75.67
CHF 75
CHF 43.81
CHF 95
CHF 67.70
CHF 75
CHF 43.81
CHF 102
CHF 59.74
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
CHF 51
CHF 35.84
CHF 53
CHF 38.23
CHF 65
CHF 43.81
CHF 83
CHF 66.91
CHF 88
CHF 62.13
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
CHF 47
CHF 35.84
CHF 56
CHF 39.03
CHF 67
CHF 39.03
CHF 49
CHF 35.05
CHF 43
CHF 31.06
CHF 63
CHF 43.81
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
CHF 28
CHF 19.91
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
CHF 129
CHF 75.67
CHF 148
CHF 101.95
CHF 28
CHF 19.91
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
CHF 133
CHF 78.06
CHF 94
CHF 62.13
CHF 229
CHF 175.23
CHF 28
CHF 15.13
SATA Hot Plug 2.5" Midline (MDL) Solid State Drives
CHF 303
CHF 238.15
CHF 148
CHF 107.53
Storage Controllers
CHF 73
CHF 58.94
CHF 73
CHF 58.94
NOTE: Supports all HPE ProLiant Server Blades, except the HPE ProLiant BL2x220c and BL685c G7 server blades.
Optional Upgrades

NOTE: The BL465c G7 supports a maximum of one array controller battery. If one Smart Array P700m controller with cache battery kit is ordered for factory integration, the internal Smart Array P410i cache module capacitor will be removed and shipped with the server for customer installation.
CHF 69
CHF 54.16
I/O Expansion Options
CHF 3,053
CHF 2,747.93
CHF 757
CHF 597.38
CHF 568
CHF 394.27
InfiniBand Mezzanine Options
CHF 170
CHF 118.68
Ultrium Tape Blades

NOTE: LTO-4 Ultrium technology
CHF 3,176
CHF 2,857.84

NOTE: LTO-3 Ultrium technology
CHF 2,208
CHF 1,987.27
StorageWorks SB40c Storage Blade
CHF 394
CHF 306.65
Expansion Blade
CHF 334
CHF 195.94
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe connect board which requires installation.
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Twelve-Core Processors
CHF 286
CHF 203.11
CHF 510
CHF 361.61
CHF 1,194
CHF 845.88
Eight-Core Processors
CHF 898
CHF 636.40
CHF 520
CHF 468.34
CHF 286
CHF 203.11
NOTE: HPE ProLiant BL465c G7 processor option kits contain one (1) processor.