HPE ProLiant DL385 G5 Parts
Unique Options

NOTE: Requires the 2 Slot x16/x4 DL385G5 225W Riser (PN 464271-B21). Only compatible with HPE ProLiant DL385 G5 server.

NOTE: This riser is only supported on the DL385G5. The G5 does not support the x16 riser from the DL385G2 system.
$332
$299.00
Memory
$388
$292.00
Optical Media

NOTE: Included in performance models.
$63
$50.00
$194
$175.00
$64
$47.00
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SATA Hot Plug 2.5" SFF Entry (ETY) Drives
$270
$199.00
$97
$75.00
Networking

NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510F adapter.
$650
$450.00

NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510C adapter.
$688
$465.00
Riser Cage Options

NOTE: Requires the 2 Slot x16/x4 DL385G5 225W Riser (PN 464271-B21). Only compatible with HPE ProLiant DL385 G5 server.
$332
$299.00
$195
$145.00
Power Supplies
$228
$181.00
Storage Controllers
SAS Controllers
Smart Array E200 Controller
$204
$159.00

NOTE: Supports the Smart Array E200 Controller, Smart Array 641 Controller, and Smart Array 642 Controller.
$88
$65.00
Smart Array P400 Controller

NOTE: The HPE Smart Array P400/256 MB Controller (PN 405132-B21) may only be installed in slots 3, 4, and 5.
$70
$53.00

NOTE: The HPE Smart Array P400/512 MB BBWC Controller (PN 411064-B21) may only be installed in slots 3, 4, and 5.
$108
$81.00

NOTE: For Smart Array P400 Controller.
$166
$129.00

NOTE: For Smart Array P400 Controller.
$157
$118.00

NOTE: This option kit contains a 24" battery cable and adhesive material for installing a batter into the server if a Smart Array P400 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.
$95
$75.00
Smart Array P600 Controller

NOTE: Requires Mixed PCI-E/X riser cage.
$122
$108.00

NOTE: This 512 MB Battery-Backed Cache Module upgrade kit supports the Smart Array P600 Controller and the Smart Array 6400 series Controller.
$599
$450.00
Smart Array P800 Controller
SAS HBA

NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
$140
$95.00
SCSI Controllers for External Drive/Storage Support
NOTE: All Ultra 320 controllers are PCI-X and require the Mixed Riser Cage Option Kit (PCI-E/PCI-X).

NOTE: Ultra320 SCSI.
$204
$148.00

NOTE: Ultra320 SCSI.
$407
$295.00

NOTE: Ultra320 SCSI.
$199
$188.00

NOTE: Supports the Smart Array E200 Controller, Smart Array 641 Controller, and Smart Array 642 Controller.
$88
$65.00
$66
$52.00
SCSI HBA

NOTE: Recommended HBA for SCSI tape drive connect.
$207
$149.00
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc