HPE ProLiant DL325 Gen12 Parts

HPE ProLiant DL325 Gen12 Parts

The HPE ProLiant DL325 Gen12 (HPE's document title is HPE ProLiant Compute DL325 Gen12) is a 1U single-socket rack server built around one 5th Gen AMD EPYC 9005 processor with 24 DDR5 DIMM slots, PCIe 5.0 throughout and HPE iLO 7. Every part below is genuine HPE, available new and refurbished, and tested for compatibility before it ships. Live pricing for each part number appears in the tables further down this page.

DL325 Gen12 Platform at a Glance

  • Form factor: 1U rack, 4.29 × 43.46 cm and 60.94 cm deep as the 8SFF server, 66.7 cm as the 4LFF and SFF/EDSFF servers, 82.18 cm as the GPU server
  • Processor: one 5th Gen AMD EPYC 9005 in a 6096-pin LGA SP5 socket, from the 8-core EPYC 9015 to the 192-core EPYC 9965, with 128 lanes of PCIe 5.0 from the processor and no separate chipset
  • Memory: 24 DDR5 DIMM slots on 12 channels, two DIMMs per channel, HPE DDR5 Smart Memory RDIMM to 6TB; LRDIMM and Persistent Memory are not supported
  • Drive bays: four chassis types — 8SFF with an optional 2SFF bay or optical drive, 4LFF with an optional optical drive, a flexible SFF/EDSFF front cage taking up to 10 SFF or 20 E3.S 1T drives with mixing allowed, and a GPU chassis pairing four single-width or two double-width GPUs with 8 E3.S 1T or 4 SFF bays
  • Storage controllers: HPE MR216i, MR408i and MR416i Gen11 in OCP and PCIe form, the MR932i-p x32-lane PCIe Gen5 controller, the Smart Array E208e-p SR Gen10 external HBA, and the NS204i-u v2 hot-plug NVMe boot device
  • Networking: no embedded ports — a default rear OCP 3.0 slot A (x16), an optional rear OCP slot B (x8 or x16) and, on the SFF/EDSFF server, optional front OCP slots, plus PCIe 5.0 x16 stand-up slots
  • Expansion: up to two PCIe 5.0 x16 slots on the 8SFF, 4LFF and SFF/EDSFF servers (slot 2 default full-height, slot 1 optional low profile or full height), up to six on the GPU server
  • Power and cooling: up to two HPE M-CRPS hot-plug power supplies from 800W to 2400W AC plus 1300W and 2200W -48VDC, and seven fans in standard, performance or liquid-cooling kits with heat sinks matched to processor wattage
  • Management: HPE iLO 7 with a dedicated 1Gb rear port and a front USB-C service port, UEFI Class 3, Silicon Root of Trust 2.0 and embedded TPM 2.0

This is a single-socket AMD server, and the one processor decides the rest of the build. The DL325 Gen12 takes one 5th Gen AMD EPYC 9005 processor in an SP5 socket, and that processor serves all 24 DDR5 DIMM slots, all 128 PCIe 5.0 lanes and, through its wattage, the heat sink and fan kit the chassis must carry. Choose the processor page first; memory, cooling and power follow from it.

Specifications on this page are taken from the HPE QuickSpecs for this server, HPE ProLiant Compute DL325 Gen12 QuickSpecs, Version 12.

Shop DL325 Gen12 Parts by Category

  • DL325 Gen12 memory — DDR5-6400 Registered Smart Memory kits from 32GB to the 256GB 3DS module
  • DL325 Gen12 drives — SFF SATA, SAS and U.3 NVMe SSDs, EDSFF E3.S NVMe SSDs to 30.72TB, LFF SSDs and 7.2K hard drives, and 10K SFF hard drives
  • DL325 Gen12 storage controllers — MR216i, MR408i, MR416i and MR932i-p controllers, the E208e-p HBA, and cache batteries and capacitors
  • DL325 Gen12 networking adapters — 1GbE to 100GbE PCIe stand-up and OCP 3.0 adapters, NDR and XDR InfiniBand, 32Gb and 64Gb Fibre Channel
  • DL325 Gen12 power supplies — 800W Platinum and 1000W, 1500W and 2400W Titanium M-CRPS kits, plus -48VDC kits and power lugs
  • DL325 Gen12 processors — all 23 listed 5th Gen AMD EPYC 9005 kits and the standard, performance and closed-loop liquid-cooling heat sinks

Also listed below: NS204i-u v2 boot devices and their cable kits, the NVIDIA L4 24GB accelerator, riser and OCP enablement kits, fan kits, drive backplane kits, internal storage cable kits, optical drives, bezel and intrusion-detection kits, and Easy Install rail kits with cable management arms.

Working on the earlier generation? We also stock HPE ProLiant DL325 Gen11 parts, the rest of the range under HPE ProLiant DL rack server parts, and every model under HPE parts by server model.

DL325 Gen12 Parts FAQ

What processors does the HPE ProLiant DL325 Gen12 use?
One 5th Gen AMD EPYC 9005 series processor in an SP5 socket. HPE lists 23 kits for it, from the 8-core EPYC 9015 at 125W to the 192-core EPYC 9965 at 500W, and the processor provides 128 lanes of PCIe 5.0 with no separate chipset.

How much memory does the DL325 Gen12 support?
6TB, as 24 x 256GB DDR5 RDIMMs across 12 channels at two DIMMs per channel. HPE also states 3TB as 12 x 256GB at one DIMM per channel. LRDIMM and Persistent Memory are not supported.

How many drives does a DL325 Gen12 hold?
It depends on the chassis. The 8SFF server takes eight SFF drives plus an optional 2SFF bay, the 4LFF server four LFF drives, the SFF/EDSFF server up to 10 SFF or 20 E3.S 1T drives with mixing allowed, and the GPU server 8 E3.S or 4 SFF drives alongside its GPUs.

Does the DL325 Gen12 have built-in network ports?
No. HPE lists the network ports as none, with a choice of OCP 3.0 or PCIe stand-up adapters instead. Rear OCP slot A is standard, rear slot B and the two front OCP slots on the SFF/EDSFF server are options.

Is the DL325 Gen12 a two-processor server?
No. It is a single-socket platform - one 5th Gen AMD EPYC 9005 processor in one SP5 socket, one heat sink, and 24 DIMM slots all served by that processor. HPE quotes every memory and PCIe figure for this server per processor because there is only one.

Can I use DL325 Gen11 parts in a DL325 Gen12?
Not the core components. The Gen12 uses the 6096-pin SP5 socket with 5th Gen EPYC 9005 processors, DDR5-6400 HPE Smart Memory kits and M-CRPS power supplies, none of which the Gen11 shares. Check each part number against the Gen12 QuickSpecs option list before assuming anything carries over.

✅ Looking for a specific DL325 Gen12 part? Browse our full selection below.

Parts Finder Narrow to your model…
Compare Selected