HPE ProLiant DL170e G6 Hard Drives

HPE ProLiant DL170e G6 Hard Drives

HPE ProLiant DL170e G6 Hard Drives

Drives

NOTE:  The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE:  To support HPE hard drives exceeding 2.2 TB, HPE Smart Array Firmware version 5.0 or later is required for the following controllers:
To use hard drives exceeding 2.2 TB, you must create a boot volume using offline ACU version 8.75 or later. HPE Smart Array controllers do not support boot volumes exceeding 2.2 TB.
Other controllers are not supported.

SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives

SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives

SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives

SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives

SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives

SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives

6G SAS ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives

6G SAS SLC Hot Plug Enterprise Performance Solid State Drives

Compare Selected