HPE ProLiant DL360 Gen10 Memory
Upgrade your HPE ProLiant DL360 Gen10 with genuine HPE DDR4 Smart Memory, in stock new and refurbished and tested before shipping. With 24 DIMM slots and one of the deepest refurb markets of any server, memory is this platform's highest-value upgrade.
DL360 Gen10 Memory Specifications
- Memory type: HPE DDR4 Smart Memory — Registered (RDIMM) and Load Reduced (LRDIMM)
- Slots: 24 DIMM slots — 12 per processor, 6 channels per CPU, 2 DIMMs per channel
- Speed: up to 2666 MT/s with 1st Gen Xeon Scalable, up to 2933 MT/s with 2nd Gen
- Maximum capacity: 1.54TB with RDIMMs (24 × 64GB) or 3TB with LRDIMMs (24 × 128GB)
- Intel Optane Persistent Memory: up to 6TB (12 × 512GB PMem modules mixed with DRAM) on select 2nd Gen Xeon CPUs
Match the speed to your CPU generation. 2nd Gen Xeon Scalable runs DDR4-2933, 1st Gen runs DDR4-2666 — the server clocks all memory to the slowest applicable speed, and RDIMMs and LRDIMMs cannot be mixed.
How much memory can the DL360 Gen10 hold?
| Configuration | Total capacity | Notes |
|---|---|---|
| 8 × 16GB RDIMM (2 CPUs) | 128GB | Entry build |
| 12 × 32GB RDIMM (2 CPUs) | 384GB | Balanced 1 DIMM per channel |
| 24 × 32GB RDIMM (2 CPUs, all slots) | 768GB | The mainstream virtualization build |
| 24 × 64GB RDIMM (2 CPUs, all slots) | 1.54TB | RDIMM maximum |
| 24 × 128GB LRDIMM (2 CPUs, all slots) | 3TB | LRDIMM maximum |
The 32GB dual-rank RDIMM is the sweet spot — abundant refurb supply at the best cost per gigabyte. For platform siblings, our DL360 Gen10 memory compatibility guide walks the exact rules.
Choosing the Right DL360 Gen10 Memory
- Match the speed to your CPU generation: 2933 MT/s kits for 2nd Gen Xeon, 2666 for 1st Gen — the server clocks all memory to the slowest applicable speed.
- Don't mix RDIMMs and LRDIMMs — pick one module type for the entire server.
- Populate both processors identically and in even quantities across the 6 channels per CPU.
- Background reading: memory rank in HPE servers and why memory speed matters.
Complete Your DL360 Gen10 Build
Pair memory with DL360 Gen10 processors, drives, storage controllers, networking adapters, and power supplies, or start from the full DL360 Gen10 parts page. Neighboring generations: DL360 Gen10 Plus memory and DL360 Gen11 memory. Or browse parts by server model.
DL360 Gen10 Memory FAQ
What memory is compatible with DL360 Gen10 servers?
HPE DDR4 Smart Memory - Registered (RDIMM) and Load Reduced (LRDIMM) modules at 2666 MT/s (1st Gen CPUs) or 2933 MT/s (2nd Gen). Match the speed grade to your processor generation and use HPE part numbers listed in the QuickSpecs.
How much RAM does the HPE ProLiant DL360 Gen10 support?
Up to 1.54TB with RDIMMs (24 x 64GB), 3TB with LRDIMMs (24 x 128GB), or up to 6TB combining Intel Optane Persistent Memory with DRAM on select 2nd Gen Xeon CPUs.
What is the maximum memory speed of the DL360 Gen10?
2933 MT/s with 2nd Generation Intel Xeon Scalable processors, or 2666 MT/s with 1st Generation - the CPU sets the ceiling and the server runs all memory at the slowest applicable speed.
Can I mix RDIMMs and LRDIMMs in the DL360 Gen10?
No - choose one module type for the entire server. RDIMMs cover builds to 1.54TB at better cost per gigabyte; LRDIMMs reach 3TB.
Do DL360 Gen10 DIMMs need to be installed in matched sets?
Yes, in practice - install even quantities, keep both processors' populations identical, and use the same capacity and rank within a bank.
✅ Looking for a specific DL360 Gen10 memory module? Browse our full selection below.


