HPE ProLiant ML110 G7 Parts
Memory
Optical Media
CA$196
CA$176.68
CA$227
CA$204.07
Drive Cage Options

NOTE: Above drive cage functional, HDDs, cable and backplane are included.
NOTE: This LFF drive cage is for field upgrade only - from NHPE LFF to HPE LFF.
NOTE: The SFF drive cage is for field upgrade only. This is used to upgrade from NHPE LFF or HPE LFF to HPE SFF.
NOTE: A HPE Smart Array Hot Plug Advance Pack for B110i w/1y 24x7 Supp Physical 1 Svr LTU (TC421A) is required for any Hot plug system in addition to the drive cage kit.
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and firmware) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
CA$162
CA$106.83
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
CA$221
CA$157.50
CA$193
CA$149.29
SATA Hot Plug LFF (3.5-inch) Entry (ETY) Drives
CA$296
CA$217.77
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
NOTE: Support for SAS non-hot plug drives requires HPE SAS/Smart Array Controller. See Step 3 below.
CA$394
CA$231.46
CA$325
CA$190.37
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
CA$162
CA$106.83
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
CA$427
CA$339.66
CA$221
CA$157.50
CA$193
CA$149.29
SATA Hot Plug LFF (3.5-inch) Entry (ETY) Drives
CA$296
CA$217.77
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
Networking
CA$111
CA$80.81
CA$144
CA$104.09
CA$99
CA$75.33
CA$152
CA$108.20
I/O Expansion Options
Power Supplies

NOTE: To upgrade to the HPE 460W Common Slot Gold Hot Plug Power Supply and to add support for redundant power supplies, customers need to purchase one HPE RPS G7 4U Enablement Kit (P/N 637464-B21).
CA$126
CA$73.96
NOTE: If RPS option is enabled on the system, the combination of all Internal Media Drives cannot exceed 1.
Power Options
CA$603
CA$353.36
Storage Controllers
SAS Controllers
NOTE: Support for SAS hard drives/tape drive requires selection of a SAS controller.
NOTE: Support for hardware RAID requires selection of a SAS controller.
Smart Array P212 Controller
Smart Array P410 Controller
CA$166
CA$97.24
Optional Upgrades
CA$73
CA$53.41
CA$92
CA$65.74
CA$56
CA$39.72
CA$237
CA$176.68

NOTE: Required to enable BBWC on the 256MB cache.
CA$364
CA$213.66

CA$1,104
CA$890.24
SCSI HBA

NOTE: Supports SCSI Tapes only, no RAID support.
CA$348
CA$204.07
NOTE: HBA is recommended for SCSI tape drive support.
Tape Backup
CA$1,515
CA$1,362.75

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
CA$2,283
CA$2,054.40

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
CA$2,541
CA$1,510.67

NOTE: Requires HPE 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack installation. Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
CA$7,425
CA$6,682.28

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
CA$4,868
CA$4,381.35
Disk Backup
HPE D2D Backup Systems with Backup Data Deduplication
NOTE: These are network connected appliances with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

NOTE: 1.5TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

NOTE: 3.0TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
USB Removable Media RDX Disk Backup Systems

NOTE: 320GB of disk capacity per data cartridge.
CA$759
CA$683.43

NOTE: 500GB of disk capacity per data cartridge.
CA$1,292
CA$1,162.79

NOTE: 1TB of disk capacity per data cartridge.
CA$912
CA$820.39
CA$300
CA$225.98
Rack Options
CA$197
CA$134.22
HPE KVM Switch Options
CA$511
CA$408.14