HPE ProLiant DL585 G5 Storage Controllers
Storage Controllers
SAS Controller
Smart Array E500 Controller
$392
$288.00
Smart Array P400 Controller

NOTE: The Smart Array P400 Controller supports internal Serial Attached SCSI and Serial ATA drives. It is supported in all HPE ProLiant DL585 G5 Models.
$70
$53.00

NOTE: The Smart Array P400 Controller supports internal Serial Attached SCSI and Serial ATA drives. It is supported in all HPE ProLiant DL585 G5 Models.
$108
$81.00
Smart Array P600 Controller

NOTE: The Smart Array P600 Controller supports internal and external Serial Attached SCSI and Serial ATA drives. It is supported in all HPE ProLiant DL585 G5 Models.
$122
$108.00
Smart Array P800 Controller
Smart Array P212 Controller
$41
$29.00
Smart Array P410 Controller
Smart Array P411 Controller
Optional Upgrades

NOTE: This option kit contains a 24" battery cable and adhesive material for installing a batter into the server if a Smart Array E500 or Smart array P400 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.
$95
$75.00

NOTE: For Smart Array P400 Controller only.
NOTE: If you install the 512MB DDR BBWC as an upgrade to a Smart Array P400/256MB Controller, you must also order part 417836-B21 (HPE SA-P400 and SA-E500 24 In Battery Cable Kit).
$166
$129.00

NOTE: For Smart Array P400 Controller only.
NOTE: If you install the Battery-backed write cache as an upgrade to a Smart Array P400/256MB Controller, you must also order part 417836-B21 (HPE SA-P400 and SA-E500 24 In Battery Cable Kit).
$157
$118.00

NOTE: For Smart Array P600 Controller only.
$599
$450.00

NOTE: Supported on HPE Smart Array P212 Controller only.
$41
$29.00

NOTE: Supported on HPE Smart Array P410 Controller and HPE Smart Array P411 Controller only.
$173
$129.00
SAS HBA

NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
$140
$95.00

NOTE: When using the 8 Internal Port SAS HBA with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
NOTE: Transfer rate 1.5 Gb/s SATA, 3Gb/s SAS.
$75
$59.00
SCSI Controllers for External Drive/Storage Support
$407
$295.00
SCSI HBA

NOTE: Recommended HBA for SCSI tape drive connect.
$207
$149.00