HP ProLiant ML150 G6 Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to the HBA or Controller technical specifications for details.
NOTE: Mixing SAS and SATA hard drives is allowed. However, only SAS hard drives will be used for RAID setting.
SATA Hot Plug 3.5" Midline (MDL) Drives
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
SATA Hot Plug 3.5" Entry (ETY) Drives
NOTE: The previous generations of 1.5G SATA non-hot plug hard drives are supported. These drives can be purchased as an option. However, they can no longer be configurable.
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
NOTE: SAS hard drives require a SAS HBA or Smart Array Controller.
SAS Hot Plug 3.5" Midline (MDL) Drives
HP 750GB 3G SAS 7.2K rpm LFF 3.5" Dual Port Midline Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Last updated: 3/18/2016
Need help finding the correct part? Live Chat operators are standing by. LET US HELP