HPE ProLiant ML110 Gen10 Rack Options
Genuine HPE rack hardware for the HPE ProLiant ML110 Gen10, new and refurbished. This server is a 4.5U tower by design, and one part changes that: the HPE ML Gen10 Tower to Rack Conversion Kit, a sliding rail rack shelf supplied with a cable management arm.
ML110 Gen10 Rack Option Specifications
- Conversion kit: the HPE ML Gen10 Tower to Rack Conversion Kit, comprising a sliding rail rack shelf and a cable management arm
- Rack height: HPE describes the rail tray as an easy-install unit taking 1U of height in a standard rack facility
- Shared across the ML Gen10 towers: the same kit is supported on the ML110 Gen10 and the ML350 Gen10 for tower to rack conversion
- Chassis being mounted: a 4.5U tower measuring 17.32in (H) × 7.68in (W) × 18.92in (D), or 44 × 19.5 × 48.05 cm
- Weight the shelf carries: from 29.82 lb (13.5 kg) in a minimum configuration up to 55.0 lb (25.0 kg) fully populated
- Rack standard: HPE rail kits are designed for HPE racks in compliance with the industry standard EIA-310-E
The 1U figure describes the tray, not the server. The ML110 Gen10 is a 4.5U tower and the conversion kit is a sliding rail rack shelf that carries it, so the finished installation occupies the tray plus the machine on it. Check the weight too — a fully populated chassis reaches 55.0 lb — and note that HPE designs these rails for racks built to EIA-310-E.
Will This Kit Fit the Rack You Have?
| What to check | What HPE specifies |
|---|---|
| Conversion kit contents | Sliding rail rack shelf with cable management arm |
| Rail tray height | 1U in a standard rack facility |
| Rack standard | HPE racks in compliance with EIA-310-E |
| Chassis carried | 4.5U tower, 17.32in × 7.68in × 18.92in |
| Weight carried | 29.82 lb to 55.0 lb, by configuration |
Read the 1U figure carefully, because it describes the rail tray rather than the server. The ML110 Gen10 is a 4.5U tower and this kit is a shelf that carries it, so the rack space the finished installation occupies is the tray plus the machine standing on it. The other number worth confirming before ordering is the weight: a fully populated ML110 Gen10 reaches 55.0 lb, and HPE designs these rails for HPE racks built to EIA-310-E, disclaiming fit, safety and compatibility on third-party racks.
Choosing the Right ML110 Gen10 Rack Option
- One kit covers both ML Gen10 towers. HPE supports the same tower to rack conversion kit on the ML110 Gen10 and the ML350 Gen10, so the part is shared across the pair rather than specific to one.
- Measure the depth, not only the height. The chassis alone is 18.92 inches deep, before the cable management arm supplied with the kit and the cabling it carries.
- Check the rack before the kit. HPE designs its rail kits for HPE racks compliant with EIA-310-E and states that use with a third-party rack is at the customer's own risk, with no warranty on materials, design, installation, safety or compatibility.
- Account for the loaded weight. A fully populated ML110 Gen10 reaches 55.0 lb, and that is the figure the shelf and the rack posts have to carry, not the 29.82 lb of a bare machine.
Complete Your ML110 Gen10 Build
Rack-mounting a tower is usually the last step of a rebuild — the rest of it is here: ML110 Gen10 memory, drives, storage controllers, networking adapters and power supplies, or the full ML110 Gen10 parts listing. The same conversion kit serves the HPE ProLiant ML350 Gen10; for the earlier tower see HPE ProLiant ML110 G7 rack options.
ML110 Gen10 Rack Options FAQ
Can an ML110 Gen10 be rack mounted?
Yes, using the HPE ML Gen10 Tower to Rack Conversion Kit. The server is built as a 4.5U tower, and the kit is a sliding rail rack shelf that carries it in a standard rack.
How much rack height does the conversion kit take?
HPE describes the rail tray as taking 1U of height in a standard rack facility. That figure covers the tray itself - the 4.5U tower it carries sits on top of it.
Does the conversion kit include a cable management arm?
Yes. The kit is supplied as a sliding rail rack shelf together with a cable management arm.
Will this kit work on other ML Gen10 towers?
HPE supports the same tower to rack conversion kit on both the ML110 Gen10 and the ML350 Gen10.
Will HPE rails fit a third-party rack?
HPE designs its rail kits for HPE racks in compliance with the industry standard EIA-310-E. It states that using an HPE rail kit with a third-party rack is at the customer's own risk and disclaims warranties on fit, installation, safety and compatibility.
How heavy is an ML110 Gen10?
Between 29.82 lb (13.5 kg) in a minimum configuration and 55.0 lb (25.0 kg) fully populated, so a loaded machine is what the shelf and the rack have to be rated for.
✅ Looking for a specific ML110 Gen10 rack option? Browse our full selection below.
Browse all models
Why Global One?
- Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 4pm ET the same day and offers NEXT DAY delivery to US customers.
