HP ProLiant DL160 G5p Parts
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
NOTE: Non-Hot Plug Models Only
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
SATA Hot Plug 3.5" Midline (MDL) Drives
NOTE: SAS/SATA Hot Plug Models Only. A SAS HBA or Array Controller is required.
SATA Hot Plug 3.5" Entry (ETY) Drives
SAS Hot Plug 3.5" Midline (MDL) Drives
HP 750GB 3G SAS 7.2K rpm LFF 3.5" Dual Port Midline Hard Drive
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
NOTE: The purchase of SAS HBA or array controller is required.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
Gigabit Ethernet Adapters
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter
NOTE: Supported only by the HP ProLiant DL160G5p Non-Hot Plug CTO Chassis (P/N 495834-B21).
10 Gigabit Ethernet Adapters
HP NC522SFP Dual Port 10GbE Server Adapter
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs.
Last updated: 8/21/2015
Need help finding the correct part? Live Chat operators are standing by. LET US HELP