Pentium III P1400-512 KB Processor Option Kit NOTE: The Pentium III P1400-512K Processor Option Kit is supported by the ProLiant ML330 Generation 2 (G2), ProLiant ML350 Generation2 (G2), and ProLiant ML370 Generation 2 (G2) servers.
Pentium III P1266-512KB Processor Option Kit NOTE: The Pentium III P1266-512K Processor Option Kit is supported by the ProLiant ML330 Generation 2 (G2), ProLiant ML350 Generation2 (G2), and ProLiant ML370 Generation 2 (G2) servers.
Pentium III P1133-512KB Processor Option Kit NOTE: The Pentium III P1133-512K Processor Option Kit is supported by the ProLiant ML330 Generation 2 (G2), ProLiant ML350 Generation2 (G2), and ProLiant ML370 Generation 2 (G2) servers.
256-MB Battery-Back Cache Module NOTE: This 256-MB Battery-Backed Cache Module supports the Smart Array 5300 series controllers, HP StorageWorks Modular Smart Array 1000 and the HP StorageWorks Modular Smart Array 500.
NOTE: Please note that some of the earlier BTO models may not support adding SATA Optical Drives. To ensure compatibility of the SATA Optical Drives, please add additional optical drives only on models with Quad-Core 5400 Series.
Hard Drive Cage
HP 5U Hot Plug HDD Drive Cage Kit NOTE: To reach maximum 8 LFF Drive support, it is required to purchase 2 Hot Plug HDD Drive Cage kit and Smart Array controller 8 ports or 2x 4 ports.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: SATA Hot Plug models require HP SAS Smart Array Controller.
NOTE: SAS Non-Hot Plug and SAS Hot Plug Models require HP SAS Smart Array Controller.
NOTE: A minimum of 2 GB of server memory is required per each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs
It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power supply for your need. The HP Power Advisor is located at: www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor
CAUTION: Optional Power Supplies used for Redundancy "must" match the original supplied power supply. Upgrades for more power headroom, when replacing the original power supplies must match if purchased for redundancy. Option Kits contain optional power supply, an IEC power cable and PDU IEC cables. In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
HP 750W CS HE Power Supply NOTE: The HP 750W power supply requires purchasing the Redundant Power Supply Enablement Kit (P/N 508544-B21).