NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives require an optional U320 Smart Array Controller or U320 SCSI HBA to support U320 transfer rates.
Smart Array 532 Controller NOTE: Supports Wide Ultra2/3 SCSI drives only. If cabling to internal drives, you must first remove the integrated controller module. ATA models require the Wide Ultra3 SCSI cable option kit 212690-B21.
Compaq RAID LC2 Controller NOTE: Supports Wide Ultra2/3 SCSI drives only. If cabling to internal drives, you must first remove the integrated controller module. ATA models require the Wide Ultra3 SCSI cable option kit 212690-B21.
Smart Array 5302/128 Controller NOTE: Supports Wide Ultra2/3 SCSI drives only. If cabling to internal drives, you must first remove the integrated controller module. ATA models require the Wide Ultra3 SCSI cable option kit 212690-B21.
Smart Array 5304/256 Controller NOTE: Supports Wide Ultra2/3 SCSI drives only. If cabling to internal drives, you must first remove the integrated controller module. ATA models require the Wide Ultra3 SCSI cable option kit 212690-B21.
256-MB Battery-Back Cache Module NOTE: This 256-MB Battery-Backed Cache Module supports the Smart Array 5300 series controllers, MSA 1000 and the Smart Array Cluster Storage.
64-bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter NOTE: Supports Wide Ultra3, Ultra320 SCSI drives only. If cabling to internal drives, you must first remove the integrated controller module. ATA models require the Wide Ultra3 SCSI cable option kit 212690-B21. NOTE: This adapter will run at 33-MHz speeds due to the 33-MHz PCI Bus.
64-bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter NOTE: Supports Wide Ultra3, Ultra320 SCSI drives only. If cabling to internal drives, you must first remove the integrated controller module. ATA models require the Wide Ultra3 SCSI cable option kit 212690-B21. NOTE: This adapter will run at 33-MHz speeds due to the 33-MHz PCI Bus.
64-Bit/133-MHz Dual Channel Ultra320 SCSI Adapter NOTE: Supports Wide Ultra3, Ultra320 SCSI drives only. If cabling to internal drives, you must first remove the integrated controller module. ATA models require the Wide Ultra3 SCSI cable option kit 212690-B21. NOTE: This adapter will run at 33-MHz speeds due to the 33-MHz PCI Bus.
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS NOTE: Supports Wide Ultra3, Ultra320 SCSI drives only. If cabling to internal drives, you must first remove the integrated controller module. ATA models require the Wide Ultra3 SCSI cable option kit 212690-B21. NOTE: This adapter will run at 33-MHz speeds due to the 33-MHz PCI Bus.
NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives require an optional U320 Smart Array Controller or U320 SCSI HBA to support U320 transfer rates.
256-MB Battery-Back Cache Module NOTE: This 256-MB Battery-Backed Cache Module supports the Smart Array 5300 series controllers, HP StorageWorks Modular Smart Array 1000 and the HP StorageWorks Modular Smart Array 500
64-Bit/133-MHz Dual Channel Ultra320 SCSI Adapter NOTE: Supports Wide Ultra3, Ultra320 SCSI drives only. If cabling to internal drives, you must first remove the integrated controller module. ATA models require the Wide Ultra3 SCSI cable option kit 212690-B21. NOTE: This adapter will run at 33-MHz speeds due to the 33-MHz PCI Bus.
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS NOTE: Supports Wide Ultra3, Ultra320 SCSI drives only. If cabling to internal drives, you must first remove the integrated controller module. ATA models require the Wide Ultra3 SCSI cable option kit 212690-B21. NOTE: This adapter will run at 33-MHz speeds due to the 33-MHz PCI Bus.
NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives require an optional U320 Smart Array Controller or U320 SCSI HBA to support U320 transfer rates.
NOTE: Please note that Serial ATA hot-plug capability and drive LEDs are not supported by the DL320 G3 embedded SATA storage controller. The purchase of the HP 8 Internal Port SAS HBA with RAID, the DL320 G3 SAS/SATA HDD Backplane Option Kit, and the DL320 Hot Plug SAS/SATA Cable Option Kit is required for Hot Plug and LED SAS/SATA support.
NOTE: SATA drives have a 1-year warranty. Please see the Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature: http://h18000.www1.hp.com/products/quickspecs/11940_na/11940_na.HTML
HP 8 Internal Port SAS HBA with RAID NOTE: The HP 8 int. Port SAS/SATA HBA with RAID requires the purchase of the SATA Rack FIO model and the DL320 SAS/SATA Hot Plug Cable option kit (398307-B21).
NOTE: For HP ProLiant DL320 G4 models purchased with Celeron or Pentium-D 800 Series processors, PCI-X is only supported as a Factory Integrated Option.
SAS Controllers
Smart Array E200 Controller NOTE: The HP Smart Array E200 Controllers require the purchase of the DL320 SAS/SATA Hot Plug Cable option kit (398307-B21).
Smart Array P400 Battery Attach Kit NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array P400 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for de
HP 8 Internal Port SAS HBA with RAID NOTE: The HP 8 Internal Port SAS HBA with RAID requires the purchase of the DL320 SAS/SATA Hot Plug Cable option kit (398307-B21).
HP SATA/SAS 1U Cable Kit NOTE: This option is required for the HP 8 Internal Port SAS HBA with RAID, the HP Smart Array E200 Controller, and the HP Smart Array P400 Controller.
NOTE: Serial ATA hot-plug capability and drive LEDs are not supported by the DL320 G5 embedded SATA storage controller.
NOTE: SATA drives have a 1 year warranty. Please see the Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature: http://h18000.www1.hp.com/products/quickspecs/11940_div/11940_div.HTML
Storage Controllers
SAS Controllers
Smart Array E200 Controller
NOTE: The HP Smart Array E200 Controllers require the purchase of the DL320 SAS/SATA Hot Plug Cable option kit (398307-B21).
Smart Array P400 Battery Attach Kit NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array P400 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.
NOTE: The NC-series network adapters listed above can be used with the integrated NC324i network adapter for ProLiant Teaming and the ProLiant Essentials Intelligent Network Pack applications.
NOTE: Serial ATA hot-plug capability and drive LEDs are not supported by the DL320 G5p embedded SATA storage controller.
NOTE: SATA drives have a 1 year warranty. Please see the Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature: http://h18000.www1.hp.com/products/quickspecs/11940_na/11940_na.html
Storage Controllers
SAS Controllers
Smart Array E200 Controller
NOTE: The HP Smart Array E200 Controllers require the purchase of the HP HBA SAS-SATA 4x1LN Cable Kit (PN: 452130-B21).
Smart Array P400 Battery Attach Kit NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array P400 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for de
HP 8 Internal Port SAS HBA with RAID NOTE: The HP SC44Ge HBA and HP 8 Internal Port SAS HBA with RAID require the purchase of the HP HBA SAS-SATA 4x1LN Cable Kit (452130-B21).
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: http://www.hp.com/go/ddr3memory-configurator
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
Battery Kit upgrade NOTE: To enable BBWC on the 256MB cache. NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array P410 Controller, and HP Smart Array P411 Controller only.
HP DL320e Gen8 Mini SAS Cable Kit NOTE: HP DL320e Gen8 mini SAS cable kit would be required for the server to be compatible with 4LFF Hot Plug drives, H222 and P222 controllers.
NOTE: To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For additional information, please see the HP SmartMemory QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html NOTE: HP memory from previous generation servers are not fully compatible with SmartMemory features in Gen8 Servers.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug with Smart Drive SFF (2.5-inch) Enterprise Drives
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server.
NOTE: The part numbers for single HDD blanks below are provided should the customer require replacement HDD blanks for their server.
NOTE: The mixing of standard SAS drives with SAS SSD drives is supported within the server, but limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives types is not supported.
NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: http://www.hp.com/go/hppoweradvisor
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supplies offer 94% efficiency with support for Intelligent Power Discovery.
NOTE: For the complete range of tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape. For hardware and software compatibility of HP tape backup products see: http://www.hp.com/storage/SPOCK andwww.hp.com/go/ebs.
NOTE: For Internal drives to be connected to DL servers please make sure that you order rack mount kit as well.
NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to the HBA or Controller technical specifications for details.
HP SA-P400 and E500 24in Battery Cable Kit NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array P400 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.
