Browse

     Ultra 3 SCSI Hotswap Drives
      18.2 GB
      36.4 GB
      72.8 GB
     Ultra 320 SCSI Hotswap Drives
      18.2 GB
      36.4 GB
      72.8 GB
      146.8 GB
      300 GB
     3.5" SAS Hotswap Drives
      36 GB
      72 GB
      146 GB
      300 GB
     2.5" SAS Hotswap Drives
      36 GB
      72 GB
      146 GB
     Memory
     Accessories

Browse
You are here: Home > HP ProLiant ML115 Options > ML115 G1 Controllers
Storage Controllers  
HP SC44Ge Host Bus Adapter
HP SC11Xe Host Bus Adapter
HP 8 Internal Port SAS HBA with RAID
NOTE: PCI-X Interface (PCI 32bit/33MHz compatible)
 
NOTE: Slot 2 only supports standard PCI 32 bit add-on card due to proximity to Heat Synk.
 
HP Smart Array E200/128 BBWC Controller
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
NOTE: PCI-X Interface (PCI 32bit/33MHz compatible)
 
NOTE: Slot 2 only supports standard PCI 32 bit add-on card due to proximity to Heat Synk
 
128MB Battery-Backed Write Cache Enabler
NOTE: Supports the Smart Array E200 Controller, Smart Array 641 Controller and Smart Array 642 Controller.
 
HP SAS/SATA 4-Port Cable
NOTE: The purchase of a SAS Storage Controller requires the purchase of HP SAS/SATA 4-Port Cable (P/N 430479-B21)
 
NOTE: On SATA models with embedded RAID, setup instructions are located in User Guide, CTO RAID is set-up not available. HP ProLiant 100 Series Server User Guide:
 
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00368941/c00368941.pdf?jumpid=reg_R1002_USEN