HP SA-P400 and SA-E500 24 In Battery Cable Kit NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array E500 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.
512MB Battery-backed write cache upgrade NOTE: For Smart Array P400 Controller only. NOTE: If you install the 512MB DDR BBWC as an upgrade to a Smart Array P400/256MB Controller, you must also order part 417836-B21 (HP SA-P400 and SA-E500 24 In Battery Cable Kit).
Battery-backed write cache upgrade NOTE: For Smart Array P400 Controller only. NOTE: If you install the Battery-backed write cache as an upgrade to a Smart Array P400/256MB Controller, you must also order part 417836-B21 (HP SA-P400 and SA-E500 24 In Battery Cable Kit).
512MB BBWC NOTE: When used with the embedded HP Smart Array P410i controller, this battery module also requires a 24 inch SFP Battery Cable (496029-B21).
Battery Kit upgrade NOTE: Option kit not supported for factory integration. NOTE: To enable BBWC on the 256MB cache. NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array P410 Controller, and HP Smart Array P411 Controller only.
HP DL785 Smart Array Controller cable option kit NOTE: Option kit not supported for factory integration NOTE: Supports internal connection of Smart Array P410 Controllers. Provides (2) cables to connect the Controller to the Optional SAS Backplane. Required each time one of the following is ordered without factory integration and will not be connected to the 468406-B21 HP SAS Expander Card.
HP SAS Expander Card NOTE: Option kit not supported for factory integration. NOTE: Enables a single Smart Array P410 Controller to control all of the embedded HDD's. Allows the configuration of a RAID array with up to 16 embedded HDD's. The Controller must be installed in PCIe Slot 1 and the Expander in PCIe Slot 2. The embedded SA P400i controller is not used. NOTE: AM440A HP DL785 SAS Expander cable option kit required. NOTE: Requires SA P410 Controller with Cache memory.
HP DL785 SAS Expander cable option kit NOTE: Option kit not supported for factory integration NOTE: Required each time the 468406-B21 HP SAS Expander card is ordered. Provides (6) cables to connect the Smart Array Controller to the Expander, and the Expander to the Primary and Optional SAS backplanes. The SAS cables provided with the DL785 and the Expander are not used.
