Browse

Browse

You are here: Home > HP ProLiant DL320 G2 Options
Choose a sub category:
DL320 G2 Memory DL320 G2 Hard Drives DL320 G2 Controllers
DL320 G2 Communications

Memory  
1024-MB PC2100 Registered ECC DDR SDRAM DIMM Memory Kit
512-MB PC2100 Registered ECC DDR SDRAM DIMM Memory Kit
256-MB PC2100 Registered ECC DDR SDRAM DIMM Memory Kit
128-MB PC2100 Registered ECC DDR SDRAM DIMM Memory Kit

Hard Drives  
Ultra320 – Universal Non-Hot Plug
 
36.4 GB 15,000 rpm, U320 Non-Hot Plug Hard Drive, 1"
72.8 GB 10,000 rpm, U320 Non-Hot Plug Hard Drive, 1"
146.8 GB 10,000 rpm, U320 Non-Hot Plug Hard Drive, 1"
NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives require an optional U320 Smart Array Controller or U320 SCSI HBA to support U320 transfer rates.
 
ATA/100 - Non-Hot Plug
 
160-GB ATA 100 7,200 RPM Hard Drive (1")
NOTE: ATA controller will only recognize 137GB of a 160GB HDD.
 
80-GB ATA 100 7,200 rpm Drive (1")
40-GB ATA 100 7,200 rpm Drive (1")
NOTE: Please see the Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
 
U320 Hard Drive QS:
 
http://h18000.www1.hp.com/products/quickspecs/11531_na/11531_na.HTML
 
ATA100 Hard Drive QS:
 
http://h18000.www1.hp.com/products/quickspecs/11361_na/11361_na.HTML
 

Storage Controllers  
Smart Array 641 Controller
Smart Array 642 Controller
256-MB Battery-Back Cache Module
NOTE: This 256-MB Battery-Backed Cache Module supports the Smart Array 5300 series controllers, HP StorageWorks Modular Smart Array 1000 and the HP StorageWorks Modular Smart Array 500
 
64-Bit/133-MHz Dual Channel Ultra320 SCSI Adapter
NOTE: Supports Wide Ultra3, Ultra320 SCSI drives only. If cabling to internal drives, you must first remove the integrated controller module. ATA models require the Wide Ultra3 SCSI cable option kit 212690-B21.
 
NOTE: This adapter will run at 33-MHz speeds due to the 33-MHz PCI Bus.
 
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS
NOTE: Supports Wide Ultra3, Ultra320 SCSI drives only. If cabling to internal drives, you must first remove the integrated controller module. ATA models require the Wide Ultra3 SCSI cable option kit 212690-B21.
 
NOTE: This adapter will run at 33-MHz speeds due to the 33-MHz PCI Bus.
 
NOTE: Please see the following Controller or SCSI Adapter QuickSpecs for Technical Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID sup
 
http://h18000.www1.hp.com/products/quickspecs/10640_na/10640_na.HTML
 
(Smart Array 5300 Series)
 
http://h18000.www1.hp.com/products/quickspecs/12067_na/12067_na.HTML
 
(Smart Array 641)
 
http://h18000.www1.hp.com/products/quickspecs/12069_na/12069_na.HTML
 
(Smart Array 642)
 
http://h18000.www1.hp.com/products/quickspecs/10429_na/10429_na.HTML
 
(SCSI Adapter)
 
http://h18000.www1.hp.com/products/quickspecs/11555_na/11555_na.HTML
 
(U320 Adapter)
 

Communications  
HP NC150T PCI 4-port Gigabit 1000T Combo Switch Adapter
HP NC310F PCI-X 1000SX Gigabit Server Adapter
HP NC320T PCI Express Single Port 1000T Gigabit Server Adapter
HP NC6170 PCI-X Dual Port 1000SX Gigabit Server Adapter
NC6770 PCI-X Gigabit Server Adapter, 1000-SX
HP NC7170 PCI-X Dual Port 1000T Gigabit Server Adapter
NOTE: Any NC61XX, NC71XX or NC77XX NIC can be used for redundancy with the embedded NC7760 Network Controller.