Browse

     Ultra 3 SCSI Hotswap Drives
      18.2 GB
      36.4 GB
      72.8 GB
     Ultra 320 SCSI Hotswap Drives
      18.2 GB
      36.4 GB
      72.8 GB
      146.8 GB
      300 GB
     3.5" SAS Hotswap Drives
      36 GB
      72 GB
      146 GB
      300 GB
     2.5" SAS Hotswap Drives
      36 GB
      72 GB
      146 GB
     Memory
     Accessories

Browse
You are here: Home > HP ProLiant DL140 G3 Options > DL140 G3 Controllers
Storage Controllers  
HP 8 Internal Port SAS HBA with RAID
NOTE: For use with Hot Plug SAS/SATA models. Required only when upgrading from a non-hot plug to a hot plug model.
 
NOTE: The selection HP 8 Internal Port SAS HBA with RAID requires the purchase of the PCI-X Riser Option kit (P/N 409347-B21)
 
HP SAS/SATA Host Cable Kit
NOTE: For use with Hot Plug SAS/SATA models. Required only when upgrading from a non-hot plug to a hot plug model.
 
HP Smart Array E500/256MB Controller (Standard RAID 0,1, 1+0)
NOTE: Selection of the E500 with the E200 will prevent installation of the E500 battery-backed write cache module.
 
256MB Battery-backed write cache upgrade for RAID 5 support
NOTE: when installing a battery-backed write cache module, the HP Smart Array E500 must be installed in the full-length PCI slot.
 
HP Smart Array E200/128 BBWC Controller
NOTE: Selection of the E500 with the E200 will prevent installation of the E500 battery-backed write cache module.
 
128-MB BBWC (Battery-Backed Write Cache) Enabler
HP PCI-X Riser Board Kit
Hot Plug Backplane Option Kit
NOTE: Required when upgrading from a non-hot plug to a hot plug model.
 
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
HP SC11Xe Host Bus Adapter
NOTE: U320 HBA with tape support only.
 
HP SC44Ge Host Bus Adapter
NOTE: SAS HBA.