| Ethernet Mezzanine Options | |
|
HP NC325m PCI Express Quad Port 1Gb Server Adapter for c-Class BladeSystem
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on only 2 of the 4 ports. | |
| HP NC360m Dual Port 1GbE BL-c Adapter | |
HP NC364m Quad Port 1GbE BL-c Adapter
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on only 2 of the 4 ports. | |
| HP NC382m Dual Port 1GbE Multifunction BL-c Adapter | |
|
HP NC532m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
NOTE: The NC532m requires a minimum of 2 GB of server memory.
NOTE: The NC532m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb. | |
HP NC542m Dual Port Flex-10 10GbE BLc Adapter
NOTE: The NC542m requires a minimum of 2 GB of server memory.
NOTE: The NC542m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC542m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect. | |
HP NC550m 10GbE 2-port PCIe x8 Flex-10 Ethernet Adapter
NOTE: The NC550m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure)
NOTE: The NC550m requires a minimum of 2 GB of server memory.
NOTE: The NC550m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC550m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect. | |
HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter
NOTE: The NC551m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure)
NOTE: The NC551m requires a minimum of 2 GB of server memory.
NOTE: The NC551m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC551m supports 1000Mbps when connected to a 1Gb Ethernet interconnect. | |
| HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter | |
| NOTE: A 10 Gigabit Ethernet adapter is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP BladeSystem c3000 Enclosure). |
| NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server memory. |
| NOTE: A 10 Gigabit Ethernet adapter will down speed to 1Gb if paired with a 1GbE interconnect. |
| NOTE: HP recommends 10Gb adapters be installed in a x8 PCIe slot for optimal performance. |
| NOTE: The ROM Based Setup Utility (RBSU) feature allows for the configuring of a FlexFabric Adapter to any of the supported protocols. For example iSCSI to FCoE (Fibre Channel over Ethernet). Note that a HP Virtual Connect profile takes precedence over the setting in this menu. Also, some FlexFabric Adapters may require that network boot be enabled in order to configure the protocol. If the protocol is configured without enabling network boot with certain FlexFabric Adapters, the protocol may not take effect. Once the protocol has taken effect on the first boot after configuring this option, network boot may be disabled if desired. |
|
| Hard Drives | |
| NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. |
|
|
| HP 300GB 6G SAS 15K 2.5" SFF Dual Port Hard Drive | |
| HP 146GB 6G SAS 15K 2.5" SFF Dual Port Hard Drive | |
| HP 72GB 6G SAS 15K 2.5" SFF Dual Port Hard Drive | |
|
| HP 1.2TB 6G SAS 10K 2.5" SFF Dual Port Hard Drive | |
| HP 900GB 6G SAS 10K 2.5" SFF Dual Port Hard Drive | |
| HP 600GB 6G SAS 10K 2.5" SFF Dual Port Hard Drive | |
| HP 450GB 6G SAS 10K 2.5" SFF Dual Port Hard Drive | |
| HP 300GB 6G SAS 10K 2.5" SFF Dual Port Hard Drive | |
| HP 146GB 6G SAS 10K 2.5" SFF Dual Port Hard Drive | |
|
| HP 146GB 3G SAS 15K 2.5" SFF Dual Port Hard Drive | |
| HP 72GB 3G SAS 15K 2.5" SFF Dual Port Hard Drive | |
| HP 72GB 3G SAS 15K 2.5" SFF Single Port Hard Drive | |
| HP 36GB 3G SAS 15K 2.5" SFF Dual Port Hard Drive | |
| HP 36GB 3G SAS 15K 2.5" SFF Single Port Hard Drive | |
|
| HP 300GB 3G SAS 10K 2.5" SFF Dual Port Hard Drive | |
| HP 146GB 3G SAS 10K 2.5" SFF Dual Port Hard Drive | |
| HP 146GB 3G SAS 10K 2.5" SFF Single Port Hard Drive | |
| HP 72GB 3G SAS 10K 2.5" SFF Dual Port Hard Drive | |
| HP 72GB 3G SAS 10K 2.5" SFF Single Port Hard Drive | |
| HP 36GB 3G SAS 10K 2.5" SFF Single Port Hard Drive | |
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.HTML |
| Empty 2.5" SAS Hot Plug Hard Drive Carrier/Tray | |
|
| HP 1TB 6G SAS 7.2K SFF DP MDL HDD | |
| HP 500GB 6G SAS 7.2K SFF DP MDL HDD | |
| Empty 2.5" SAS Hot Plug Hard Drive Carrier/Tray | |
|
| HP 1TB 3G SATA 7.2K 2.5in MDL HDD | |
| HP 500GB 3G SATA 7.2K 2.5in MDL HDD | |
| HP 160GB 3G SATA 7.2K 2.5in MDL HDD | |
| Empty 2.5" SATA Hot Plug Hard Drive Carrier/Tray | |
|
| HP 120GB 3G SATA SFF 2.5-inch Midline Solid State Drive | |
HP 60GB 3G SATA SFF 2.5-inch Midline Solid State Drive
http://h18000.www1.hp.com/products/quickspecs/13021_na/13021_na.html | |
|
