Browse

Browse
You are here: Home > HP ProLiant BL20p G3 Options
Choose a sub category:
BL20p G3 Processors BL20p G3 Memory BL20p G3 Hard Drives
BL20p G3 Controllers BL20p G3 Communications
Processors  
Intel Xeon Dual-Core Processor 2.8 GHz-4M Processor Option Kit
Intel Xeon Single-Core 3.8 GHz-2M Processor Option Kit
Intel Xeon Single-Core 3.4 GHz-2M Processor Option Kit
Intel Xeon Single-Core 3.2 GHz-2M Processor Option Kit
Intel Xeon Single-Core 3.0 GHz-2M Processor Option Kit
Intel Xeon Single-Core 3.6 GHz-1M Processor Option Kit
Intel Xeon Single-Core 3.4 GHz-1M Processor Option Kit
Intel Xeon Single-Core 3.2 GHz-1M Processor Option Kit
Intel Xeon Single-Core 2.8 GHz-1M Processor Option Kit(Low-Voltage)
Memory  
1 GB Advanced PC2 PC3200 DDR2 SDRAM DIMM Memory Kit (2 x 512 MB)
2 GB Advanced PC2 PC3200 DDR2 SDRAM DIMM Memory Kit (2 x 1024 MB)
4 GB Advanced ECC PC2-3200 DDR2 SDRAM DIMM Dual Rank Memory Kit (2 x 2 GB)
Hard Drives  
HP Ultra320 Hard Disk Drives
 
HP 300GB U320 15K Universal HDD
HP 300GB U320 10K Universal HDD
HP 146GB U320 15K Universal HDD
HP 146GB U320 10K Universal HDD
HP 72GB U320 15K Universal HDD
HP 72GB U320 10K Universal HDD
HP 36GB U320 15K Universal HDD
HP 36GB U320 10K Universal HDD
HP 18GB U320 15K Universal HDD
Storage Controllers  
128MB Battery-Backed Write Cache with Battery Housing
NOTE: Please see the following Controller QuickSpecs for Technical Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID support, and additi
 
http://h18000.www1.hp.com/products/quickspecs/12030_na/12030_na.HTML
 
(Smart Array 6i)
 
Communications  
HP ProLiant BL20p Dual NC370I Multifunction Network Adapter
NOTE: The HP BladeSystem Multifunction iSCSI and RDMA features are not currently supported in a Linux environment. Future support is planned.
 
NOTE: A minimum of 1 GB of memory per port is required for NC370x adapters, with a maximum of two NC370x ports permitted in a server.