 | Important Information | | | Access panel | | | Hard drive blank | | | Power button/LED board kit with LED cable and local I/O cable (used with I/O dongle cable systems) | | | Power button/LED board with LED cable (used with diagnostic cable systems) | | | SCSI backplane board with cable (must be used with I/O dongle cable systems that have system board 348271-001, 5a below) | | | SCSI backplane board with cable (must be used with diagnostic cable systems that have system board 305312-001, 5b below) | | | System I/O board with heatsinks (2), (for systems with a 4 connector I/O cable port, cable logo next to I/O port) 1,2 | | | System I/O board with heatsinks (2), (for systems with a 2 connector Diagnostic cable port, no cable logo next to Diagnostics port.) 1 | | | Dual port NC7781 Gigabit NIC | | | Smart Array 5i Controller module | | | Processor Heatsink | | | Intel Pentium IV Xeon processor assembly, 2.80 GHz/533 MHz FSB, 512-KB L2 cache only | | | Intel Pentium IV Xeon processor assembly, 2.80 GHz/533 MHz FAB, 512-KB L2, 1-MB L3 cache | | | Intel Pentium IV Xeon processor assembly, 3.06 GHz/533 MHz FSB, 512-KB L2 cache only | | | Intel Pentium IV Xeon processor assembly, 3.06 GHz/533 MHz FSB, 512-KB L2, 1-MB L3 cache | | | Intel Pentium IV Xeon processor assembly, 3.20 GHz/533 MHz FSB, 512-KB L2, 1-MB L3 cache | | | Intel Pentium IV Xeon processor assembly, 3.20 GHz/533 MHz FSB, 512-KB L2, 2-MB L3 cache | | | Intel Xeon processor - 2.80 GHz/533MHz FSB - 1MB L3 cache | | | Intel Xeon processor 3.06 GHz/533 MHz - 1MB L2 cache | | | Intel Xeon processor 3.20 GHz/533 MHz FSB - 1MB L3 cache | | | Intel Xeon processor 3.20 GHz/533 MHz FSB - 2-MB L3 cache | | | Processor power module (PPM) | | | System Fan assembly | | | Plastics and hardware kit 3 | | | Replacement battery, 3-V lithium 3 | | | ProLiant BL20p G2 server blade return kit 3 | | | 18-GB, Wide Ultra3, 1-inch hot-plug (10,000 rpm) | | | 18-GB, Wide Ultra3, 1-inch hot-plug (15,000 rpm) | | | 18-GB, Wide Ultra320, 1-inch hot-plug (15,000 rpm) | | | 36-GB, Wide Ultra3, 1-inch hot-plug (10,000 rpm) | | | 36-GB, Wide Ultra3, 1-inch hot-plug (15,000 rpm) | | | 36-GB, Wide Ultra320, 1-inch hot-plug (10,000 rpm) | | | 36-GB, Wide Ultra320, 1-inch hot-plug (15,000 rpm) | | | | | | 72-GB, Wide Ultra320, 1-inch hot-plug (10,000 rpm) | | | | | | 72-GB, Wide Ultra320, 1-inch hot-plug (15,000 rpm) | | | | | | 145-GB, Wide Ultra320, 1-inch hot-plug (10,000 rpm) | | | | | | Blank hard drive tray, no logo 3 | | | DIMM, 256-MB, registered 266-MHz SDRAM 3 | | | DIMM, 512-MB, registered 266-MHz SDRAM 3416355-001 SPS-DIMM REG 512MB PC2-5300 64 | | | DIMM, 1-GB, registered 266-MHz SDRAM 3 | | | | | | DIMM, 2-GB, registered 266-MHz SDRAM 3 | | | Dual Port Fibre-channel Mezzanine Card (2-Gb) upgrade module 3 | | | Patch Panel pass-thru board with Fibre | | | Transceiver Board, 850 mm, Fibre Channel, 2 Gb | | | | | | SmartArray 5i+ SODIMM, 64-MB, cache memory module 3 | | | Battery pack for Battery Backed Write Cache enabler 3 | | | BBWC Battery pack cable kit (10 pin cable) 3 | | | Blade Server Ejector Lever and Latch assembly | | | Power supply, hot-pluggable - 2-phase, 48V input, 1250W - With Power Factor Correction (PFC) | | | Server blade blank | | | Signal backplane | | | Signal backplane (enhanced for blade enclosure used with BL30p server environments) | | | | | | Power backplane assembly | | | Power backplane assembly (enhanced for blade enclosure used with BL30p server environments) | | | | | | Server blade management module | | | Server blade management module (enhanced for blade enclosure used with BL30p server environments) | | | | | | Server blade management module cable 1,2 | | | Diagnostic cable 1,2 | | | Rack-mounting hardware kit 1 | | | Telco rack startup kit 1,3 | | | Telco rack expansion kit 1,3 | |
|
|
|
|